TRD STB, T88H kit, built GTE head, 4-row FMIC, ATI fludamper, inj resistor
01-23-09, 08:02 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2008
Location: FL
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
TRD STB, T88H kit, built GTE head, 4-row FMIC, ATI fludamper, inj resistor
Parting out my setup, its all US-spec GTE parts in excellent condition
TRD strut tower brace $200 shipped
T88H 34D kit $2350 shipped
includes: 4" DP/MP, both horn & k&n intakes, mint turbo with no play, blanket, oversize ss mani, type r wastegate, all mounting hardware/lines
Built GTE head $1900 shipped
includes: adj UR gears, port/polish, 5-angle valve job, Crower springs, Titanium retainers, new valve seals, new OEM headgasket (no cams)
4-row Greddy FMIC $1250
geniune Greddy core, all pipes (routed inside framerail), couplers, t-bolt clamps, turbonetics godzilla BOV, and bung for IAT
BoostLogic SFI-certified crank pulley (silver) $300 shipped
GTE resistor $125
OEM toyota, for low impedence injectors
GTE igniter $125
OEM toyota, perfect working condition
I am on SF under "2JZ", link to trader rating: http://www.supraforums.com/forum/itrader.php?u=86068
cell 561-541-4098, i am currently in FL
Thanks,
Vic
TRD strut tower brace $200 shipped
T88H 34D kit $2350 shipped
includes: 4" DP/MP, both horn & k&n intakes, mint turbo with no play, blanket, oversize ss mani, type r wastegate, all mounting hardware/lines
Built GTE head $1900 shipped
includes: adj UR gears, port/polish, 5-angle valve job, Crower springs, Titanium retainers, new valve seals, new OEM headgasket (no cams)
4-row Greddy FMIC $1250
geniune Greddy core, all pipes (routed inside framerail), couplers, t-bolt clamps, turbonetics godzilla BOV, and bung for IAT
BoostLogic SFI-certified crank pulley (silver) $300 shipped
GTE resistor $125
OEM toyota, for low impedence injectors
GTE igniter $125
OEM toyota, perfect working condition
I am on SF under "2JZ", link to trader rating: http://www.supraforums.com/forum/itrader.php?u=86068
cell 561-541-4098, i am currently in FL
Thanks,
Vic
Last edited by Bubbles; 01-29-09 at 05:47 AM.
01-23-09, 08:08 PM
#3
Driver School Candidate
Thread Starter
Join Date: Jan 2008
Location: FL
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I would prefer not to part it out, sorry bro.
Here is the link to the dyno vid, 6-speed car on pump gas made 629rwhp...full boost just under 5000 rpm i think...rpm go by quickly when this beast unleashes....its full 4" on exhaust side....turbo is factory tight with no play in/out or side/side, no smoke no leaks
http://www.youtube.com/watch?v=4z2VlkZn4mA
Here is the link to the dyno vid, 6-speed car on pump gas made 629rwhp...full boost just under 5000 rpm i think...rpm go by quickly when this beast unleashes....its full 4" on exhaust side....turbo is factory tight with no play in/out or side/side, no smoke no leaks
http://www.youtube.com/watch?v=4z2VlkZn4mA
Trending Topics
03-17-09, 06:43 AM
#15
Pole Position
iTrader: (4)
Join Date: Nov 2005
Location: ID
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Dont Deal with this seller. Was suppose to receive the parts or money back weeks ago an nothing. Negative Feed back is going to be left an hopefully others realize not to purchase from this guy.