WTB: Budget NA-T turbo kit or any part in the kit
#1
Rookie
Thread Starter
Join Date: Apr 2007
Location: ca
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Budget NA-T turbo kit or any part in the kit
i am looking for a cheap used or new turbo kit or any part in the kit for my auto sc300, will only run 7psi in the future let me know know what you have. i have paypal ready.
Last edited by shuiyuan; 01-27-09 at 01:13 AM.
#4
Lexus Champion
iTrader: (15)
BL Stage 2 Kit with the following specifics:
Oil Feed and Return Kit.
FSM 4" Downpipe & Midpipe (Not standard on BL Kits.)
Garrett 67P Turbo (Journal) w/.81 AR Exhaust Housing. (Full Boost by 4k)
BL Tubular Manifold with Tial W/G w/dump tube (Tial WG not standard on BL Kits)
4" Polished Intake Pipe w/AEM Dry Filter
PTE Bar and Plate FMIC w/Related FSM FMIC Custom Piping w/Tial BOV.
Walbro GSS341 (1) Fuel Pump
Includes all the silcone couplings and clamps.
The FMIC piping is supra specific, but you can always mod it for the sc3.
This setup with a 2.5mm HG and ARP Headstuds made 530rwhp @ 18lbs in my car on pump gas. Kit has about $1k in options (DP/MP and Tial Gate).
Price: $4k + s/h
--------------------------------------------------------------------------
I'll also be putting up the following parts:
FSM Intake Manifold (Just bare manifold|upper & lower)
*does not include TB, fuel rail, or t.cable)
Price: $800 + s/h ($400 savings).
FSM Fuel Rail Kit w/Injectors and Fuel Lab FPR w/Liquid Filled Gauge.
*This is bascially a modified NA Rail; works with above mentioned IM.
-PTE 750 cc top feed/low impedance injectors w/clips. (no lines included).
Price: $625+s/h ($250+ savings)
--------------------------------------------------------------------------
The parts will be up forsale end of March; pm me if interested.
I will also be accepting deposits if you want me to hold the parts for you!
PM ME OR Email: vntperformance@hotmail.com
AOL IM: vntper
YAHOO IM: vntper
Oil Feed and Return Kit.
FSM 4" Downpipe & Midpipe (Not standard on BL Kits.)
Garrett 67P Turbo (Journal) w/.81 AR Exhaust Housing. (Full Boost by 4k)
BL Tubular Manifold with Tial W/G w/dump tube (Tial WG not standard on BL Kits)
4" Polished Intake Pipe w/AEM Dry Filter
PTE Bar and Plate FMIC w/Related FSM FMIC Custom Piping w/Tial BOV.
Walbro GSS341 (1) Fuel Pump
Includes all the silcone couplings and clamps.
The FMIC piping is supra specific, but you can always mod it for the sc3.
This setup with a 2.5mm HG and ARP Headstuds made 530rwhp @ 18lbs in my car on pump gas. Kit has about $1k in options (DP/MP and Tial Gate).
Price: $4k + s/h
--------------------------------------------------------------------------
I'll also be putting up the following parts:
FSM Intake Manifold (Just bare manifold|upper & lower)
*does not include TB, fuel rail, or t.cable)
Price: $800 + s/h ($400 savings).
FSM Fuel Rail Kit w/Injectors and Fuel Lab FPR w/Liquid Filled Gauge.
*This is bascially a modified NA Rail; works with above mentioned IM.
-PTE 750 cc top feed/low impedance injectors w/clips. (no lines included).
Price: $625+s/h ($250+ savings)
--------------------------------------------------------------------------
The parts will be up forsale end of March; pm me if interested.
I will also be accepting deposits if you want me to hold the parts for you!
PM ME OR Email: vntperformance@hotmail.com
AOL IM: vntper
YAHOO IM: vntper
#6
Rookie
Thread Starter
Join Date: Apr 2007
Location: ca
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
i got couple emails for this kit, but i only need the turbo kit parts like:
Turbo charger
turbo lines
Manifold
wastegate
intercooler pipes
i do have intercooler so don't need
down pipe, wastegate pipe, intake pipe
Turbo charger
turbo lines
Manifold
wastegate
intercooler pipes
i do have intercooler so don't need
down pipe, wastegate pipe, intake pipe
#7
Pole Position
iTrader: (1)
Join Date: Oct 2007
Location: michigan
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
if you need a side draft intake manifold we build these for the 2jzge can come with a fuel rail for 14mm injectors and injector bungs installed. the set up would be like the one i am using on my car.
Last edited by adam8103; 01-30-09 at 06:06 AM.
Trending Topics
#10
Rookie
Thread Starter
Join Date: Apr 2007
Location: ca
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
vntperform
SC400 / 300 Classifieds
11
06-04-09 12:38 PM