GA Auto to manual swap - R154 tranny
04-20-09, 10:02 AM
#1
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: GA
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
Auto to manual swap - R154 tranny
hey guys,
i'm selling my drivetrain which includes the following:
-R154 from a 1JZ: low miles according to previous owner, no grinds (includes all sensors, covers, hub w/ new throwout bearing, rings and washers, fork)
-new 1JZ bellhousing
-new 1JZ flywhell and new flywheel bolts
-new Horsepowerfreaks ferramic clutch kit w/ new pressure plate bolts
-Brake and Clutch pedals
-Clutch master and slave cylinders including line from master to slave
-full driveshaft, mk3 front and sc300 rear (no rear guibo/flex disk as it is cracked)
-tranny mount
-modified shifter (one member has said that shifter may need to be rewelded but i don't bang through gears and am not afraid of breaking it. solid enough for me)
-rubber shifter boot (may want to get a new one as i ripped mine a little trying to run wiring for my cutout)
-leather shifter covering (don't know what you call it but it's the interior shifter piece)
-1jz and/or lexus 5 speed *****
when I say "new", parts have 1.5k miles on it after install. the only things missing that i can think of is to get a new pilot bearing and new guibo. this should be pretty much all you will need to do the conversion.
please take a look at my sig for link to some of the parts for now. i'll try to get pics soon.
$2000 for everything. am currently not parting out unless i get different buyers for everything...locals are preferred also due to size and weight. lowballers will be ignored
pics of the tranny added:
i'm selling my drivetrain which includes the following:
-R154 from a 1JZ: low miles according to previous owner, no grinds (includes all sensors, covers, hub w/ new throwout bearing, rings and washers, fork)
-new 1JZ bellhousing
-new 1JZ flywhell and new flywheel bolts
-new Horsepowerfreaks ferramic clutch kit w/ new pressure plate bolts
-Brake and Clutch pedals
-Clutch master and slave cylinders including line from master to slave
-full driveshaft, mk3 front and sc300 rear (no rear guibo/flex disk as it is cracked)
-tranny mount
-modified shifter (one member has said that shifter may need to be rewelded but i don't bang through gears and am not afraid of breaking it. solid enough for me)
-rubber shifter boot (may want to get a new one as i ripped mine a little trying to run wiring for my cutout)
-leather shifter covering (don't know what you call it but it's the interior shifter piece)
-1jz and/or lexus 5 speed *****
when I say "new", parts have 1.5k miles on it after install. the only things missing that i can think of is to get a new pilot bearing and new guibo. this should be pretty much all you will need to do the conversion.
please take a look at my sig for link to some of the parts for now. i'll try to get pics soon.
$2000 for everything. am currently not parting out unless i get different buyers for everything...locals are preferred also due to size and weight. lowballers will be ignored
pics of the tranny added:
Last edited by craaaazzy; 04-27-09 at 10:41 AM.
04-24-09, 06:00 PM
#7
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: GA
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
wow, really? i can definitely ship the parts to shern easily but the rest would be an issue. i'm assuming the shipping would need to be done via a pallet due to weight. upinthelex, can u research that? do u know anyone in atlanta that can help pack this stuff maybe? newborn is taking up a lot of my time currently.
Trending Topics
04-24-09, 06:09 PM
#8
Here's whats going down with me...
My plan for the next month is to move out of my current house and drive the lexus pulling a trailer w/ the 27K mile 1uz in it across country to the east coast to my dad's bodyshop in Maryland where I plan to install the auto couture kit that I need to pick up in LA on the way outta here.
Buying this would save me from having to haul the auto trans with the motor and Torque converter for most of the trip.
If I went through the south, visting my aunts and uncles in Louisanna and North Carolina respectively, I could pick this up on the way up rt 95 to Maryland.
My plan for the next month is to move out of my current house and drive the lexus pulling a trailer w/ the 27K mile 1uz in it across country to the east coast to my dad's bodyshop in Maryland where I plan to install the auto couture kit that I need to pick up in LA on the way outta here.
Buying this would save me from having to haul the auto trans with the motor and Torque converter for most of the trip.
If I went through the south, visting my aunts and uncles in Louisanna and North Carolina respectively, I could pick this up on the way up rt 95 to Maryland.
04-25-09, 03:05 PM
#9
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: GA
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
upinthelex, that would work for me. i would just need to receive a deposit from you to confirm ur commitment once price is confirmed.
u and shern need to send me an email to craaaazzy@gmail.com and we can discuss the price.
to all, this set up is still available until i get both parties committed to the parts. thanks.
fred
u and shern need to send me an email to craaaazzy@gmail.com and we can discuss the price.
to all, this set up is still available until i get both parties committed to the parts. thanks.
fred
04-25-09, 08:56 PM
#10
Sorry guys, I'm droppin' out.
California SMOG ***** won't allow the change in transmission. It won't pass visual.
I may have to get the car inspected by the state upon return from maryland in order to get another title (if my car totals) and I don't want any problems.
California SMOG ***** won't allow the change in transmission. It won't pass visual.
I may have to get the car inspected by the state upon return from maryland in order to get another title (if my car totals) and I don't want any problems.
04-27-09, 06:54 AM
#11
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: GA
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
wow, they won't allow a transmission swap? how does that have anything to do with emissions??? i've always wanted to move to cali but it seems like u can't do anything to a car.
