nghty89

Name: Landon Colston
Location: Hampton Roads, Va
Contact: 757-621-5084
Asking Price: Will be next to each item. Paypal preferred. All prices are plus shipping (due to weight differences, etc)
Items:

- Non-VVTI Lower Intake Manifold $20
- VVTI? Lower Intake Manifold $20
- Traction Equipped Throttle Body $30
- (2) 2jzge Distributor $40 each
- 1 set of wires for distributor - GOES WITH THE FIRST DISTRIBUTOR BOUGHT
- Alternator $30
- EGR Valve and piping (should bolt right up) $40
- Water Pipe (side of block from rear of water pump) $15
- Power Steering Pump with Driftmotion Pulley and Driftmotion Stainless Steel Relocation line for the MKiii chassis $150 FOR ALL ($100 for the PS pump and pulley, $50 for the DM line)
- Lexus V8 AFM housing with adjuster screw $80
- 3" Test Pipe $30
- AC Compressor $100
- Midsump Oil Pan (I think I have everything that goes with this). It has been pre-drilled for an Oil drain for a turbo $40
- Stock Clutch Fan SOLD
- Cam Gears with bolts $20 (will not separate these)
- 2jzge Valve Covers $40 (will not separate these)
- 2jzge Exhaust Manifolds with O2 sensors/wires and intact heat shield $150
- Unorthodox Crank Pulley $50
- Starter $30
- Idle Tensioner Pulley (works well) $20
- 7mge Y Pipe (for valve covers. 7mgte upgrade for vacuum lines) $15
- Greddy Oil Catch Can (with fittings and brackets. Hasn't been used) SOLD
- 6 Blue/Skinny injectors (no idea of the size) $20 per injector
- 8 Brown/Thick injectors (no idea of the size) $20 per injector
- A few random 2jzge engine brackets/mounts $no idea$
- 2jzge Engine Harness (missing tps and isc pigtails, but in great condition otherwise) $125

I can provide closer pictures of specific parts. Just ask.

matrixgts

iTrader: (1)

what year car and mileage the cam gears came of off.i'll let you know what's up this weekend.are they warped

Supra Dr

iTrader: (14)

Need a vouch to sell this due to the volume for parts here.

nghty89

The cam gears came from a 94 (i believe), and no they are not warped. I do not know about the mileage. These parts came in 3 boxes along with my second 2jz I bought to give my swap a rear-sump oil pan so it would fit with the 89 supra cross member. Here is a link to that build in case anyone needs proof I owned and built this thing (http://www.supramania.com/forums/showthread.php?t=81232). Plus, I can recite IN DETAIL every bit of the build so if you want to call and test me, be my guest

Hmm, several people on supramania.com can vouch for me. I don't know anyone on clublexus, I'm sorry. I've made posts here and there, but I got into clublexus too late into my build to bother too much, as opposed to all my time spent on supramania. The guys on supramania are soundslikesemi87, forcefedsupra, applesauce, nytefire, s000pra89t, and brs86supra. I know them all in person and as good friends. I also have the exact same FS thread over on supramania under the JZ parts for sale and MKiv supra sections.


EDIT: My apologies, I just went back and re-read the rules for the FS section. I'm so used to supramania that I forgot to read the CL rules first. What can I do to rectify the mistake? I really don't know anyone on here, nor do I think I have enough posts for this FS thread.

Supra Dr

iTrader: (14)

Check w/ them on a vouch - there's alot of crossover members
from there to here.

nghty89

Will do. I'll see if they'll post into this thread for me.

empera

iTrader: (13)

will vouch for Landon~

davismj711

I will also vouch for Landon.

SC3_Dred

iTrader: (2)

how much for the lower vvti intake mani shipped to 30121?

-Thnks

nghty89

Sweet guys, thanks for the help!

Question is, which is the vvti one? The one with the random vacuum pipe on it? I should be able to do that for $30-40 shipped. It depends on if it will fit in a USPS flat rate box. I'll cover any shipping over $10, so the most you end up paying is $30 total. PM me to further discuss price.

YeA 2jZ

iTrader: (15)

how much for the serpentien belt tensioner pulley how many miles on it

nghty89

$15 plus whatever shipping ends up being. No idea on the miles, this was one of the parts that came with my second 2jz. He gave me all his extras since I had no clue what I still needed at that point in my build. It still works fine, just a little dirty. I can polish it up and send pictures if you would like. Just let me know what email to send them too.

Deceptik1

iTrader: (6)

Do you happen to have the bottom portion of the oil pan? The part with the drain plug?