CA FS-1jzgte and w58 Transmission
09-01-09, 09:56 PM
#1
Lexus Champion
Thread Starter
iTrader: (8)
Join Date: Dec 2003
Location: California
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
FS-1jzgte and w58 Transmission
*****************SOLD********************
Alright guys up for sale i have my 1jzgte engine complete with w58 transmission. I have been daily driving on this engine and transmission for the past 2 years and everything has held up very well. i do not know how many miles are on the engine, but if i were to guess i'd say about 95k. On the transmission there are 170k miles. Now here is the catch to everything. The engine and transmission are still in my car and you'd have to take the whole car with you, reason being that i got rear ended and the car was deemed a total loss. So basically think of this thing as a front clip. If you are looking to do a 1jz swap and 5 spd swap at the same time this is perfect for you as it has everything necessary for the 5spd swap as well as the 1jzgte motor. All the wiring is there as well as the ecu and the harness is already extended. So basically if you want to swap your car EVERYTHING is here for you.
Now with this purchase you will also get my whole car, everything in the interior is still in good condition and i actually just SEM'd my whole interior black so you will get all of that too. I will most likely be taking the seats and my steering wheel though. I haven't decided yet, but you also might get my wheels (advan model vii's not my meisters) depending on how much the final sale price ends up being (you cheap bastards
)
Basically this is a whole 1993 Lexus SC300 5spd with 1jzgte with major rear end damage.
**********EDIT*************
Also forgot to mention that this purchase includes a Greddy profec boost controller as well as a Apexi Safc2 black series.
Things i have already taken off the car (so basically, things missing on the car):
-whole spring/strut assembly
-front brakes
-sway bars
-front seats
-steering wheel setup
For those interested in this, i also have a FMIC core (31 x 12 x 3) and a Tial BOV that i can add in for an additional cost
asking price 2800 obo.
Located in Huntington Beach, CA
If this doesn't sell within the next 4-5 days, i'm just going to put these parts into my new car. So if you're interested ACT QUICK!!!
This is what you will be getting basically:
and just for kicks, my car in its final glory
Alright guys up for sale i have my 1jzgte engine complete with w58 transmission. I have been daily driving on this engine and transmission for the past 2 years and everything has held up very well. i do not know how many miles are on the engine, but if i were to guess i'd say about 95k. On the transmission there are 170k miles. Now here is the catch to everything. The engine and transmission are still in my car and you'd have to take the whole car with you, reason being that i got rear ended and the car was deemed a total loss. So basically think of this thing as a front clip. If you are looking to do a 1jz swap and 5 spd swap at the same time this is perfect for you as it has everything necessary for the 5spd swap as well as the 1jzgte motor. All the wiring is there as well as the ecu and the harness is already extended. So basically if you want to swap your car EVERYTHING is here for you.
Now with this purchase you will also get my whole car, everything in the interior is still in good condition and i actually just SEM'd my whole interior black so you will get all of that too. I will most likely be taking the seats and my steering wheel though. I haven't decided yet, but you also might get my wheels (advan model vii's not my meisters) depending on how much the final sale price ends up being (you cheap bastards
)Basically this is a whole 1993 Lexus SC300 5spd with 1jzgte with major rear end damage.
**********EDIT*************
Also forgot to mention that this purchase includes a Greddy profec boost controller as well as a Apexi Safc2 black series.
Things i have already taken off the car (so basically, things missing on the car):
-whole spring/strut assembly
-front brakes
-sway bars
-front seats
-steering wheel setup
For those interested in this, i also have a FMIC core (31 x 12 x 3) and a Tial BOV that i can add in for an additional cost
asking price 2800 obo.
Located in Huntington Beach, CA
If this doesn't sell within the next 4-5 days, i'm just going to put these parts into my new car. So if you're interested ACT QUICK!!!
This is what you will be getting basically:
and just for kicks, my car in its final glory
Last edited by vinh; 09-29-09 at 09:45 PM.
Trending Topics
09-02-09, 07:58 PM
#8
Lexus Champion
Thread Starter
iTrader: (8)
Join Date: Dec 2003
Location: California
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
no time or space. I would ideally like to save everything and swap it into my new car, but i got royally screwed by insurance so i just need as much cash as i can get right now
Thanks man, i might just pick up another sc3 or something. This time no more old man tan for me though!!
OMG! crazy dude im so sorry this happened to your car. thing was soooooo clean. what you picking up?
09-02-09, 09:13 PM
#9
Lead Lap
iTrader: (2)
Join Date: Aug 2004
Location: New York
Posts: 670
Likes: 0
Received 0 Likes
on
0 Posts
damn bro, that ish sucks man. Ur SC will go down as still one of the classics. I hope you find another one soon and fast. I might know of one for sale over in cali blk/blk 97sc300 auto. PM if you are interested.
What are the specs on those wheels and what would u get rid of them for?
Also what about your jdm window visors?
What are the specs on those wheels and what would u get rid of them for?
Also what about your jdm window visors?
09-03-09, 09:33 AM
#10
Lead Lap
iTrader: (7)
Join Date: Jul 2009
Location: CA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
damn bro, that ish sucks man. Ur SC will go down as still one of the classics. I hope you find another one soon and fast. I might know of one for sale over in cali blk/blk 97sc300 auto. PM if you are interested.
What are the specs on those wheels and what would u get rid of them for?
Also what about your jdm window visors?
What are the specs on those wheels and what would u get rid of them for?
Also what about your jdm window visors?
09-03-09, 10:29 AM
#12
Lexus Champion
Thread Starter
iTrader: (8)
Join Date: Dec 2003
Location: California
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
damn bro, that ish sucks man. Ur SC will go down as still one of the classics. I hope you find another one soon and fast. I might know of one for sale over in cali blk/blk 97sc300 auto. PM if you are interested.
What are the specs on those wheels and what would u get rid of them for?
Also what about your jdm window visors?
What are the specs on those wheels and what would u get rid of them for?
Also what about your jdm window visors?
I got them from www.Luxurymods.com for 40 dollars ish.
09-03-09, 01:59 PM
#15
Lexus Champion
ahhh man all that work on that interior and now it goes away.... this sux! You should piece out the interior and other stuff, you'll make some nice change and then sell your motor / drivetrain on its own for 2800. Great price! GLWS