MD SC300/400 Parts for sale
10-06-09 | 03:45 PM
#1
SC300/400 Parts for sale
Motor Mounts
Sc400 motor mounts with 20K miles which were purchased last year from Lexus of Rockville. I went with custom poly motor mounts so these are up for grabs.
$50 for the pair + $12 shipping anywhere in the lower 48. Local pickup is welcomed.
2800 stall converter
Purchased from Lextreme for 95 SC400 and never installed.
SOLD Local pickup is welcomed.
Stock 92-96 SC300/SC400 front lip
Comes with all the aluminum mounting pieces. The lip was torn in two pieces and repaired. The lip isn't in all that great of condition and needs some DIY work and paint. The aluminum pieces need to be straightened.
$50 + $20 ship anywhere in the lower 48. Local pickup is welcomed.
92-96 SC300/400 front bumper cover w/ fogs
Is is dark green and in good condition.
$50 + $70 to ship anywhere in the lower 48. Local pickup is welcomed.
92-96 SC300/400 rear bumper cover
It is dark green and is in fair condition. No rips or tears but has cracked paint.
$30 + $60 to ship anywhere in the lower 48. Local pickup is welcomed.
Also I'd like to gauge interest in a 1uzfe engine partout.
The engine has 140K miles and is a 95 engine. Timing belt was done less than 10K miles ago. I'm talking intake plenums, injectors, rails, lower intake, heads, cams, pistons, rods, crank, block, TB, sensors, starter, AC comp, Alternator, PS pump, etc...
The engine is assembled as a long block currently and was a good runner before being removed for a lower mileage swap. If you need something let me know and I will give you a price on it.
a340e trans
It's from 95 SC400with 140K. No problems with it. It's currently attached to the motor. $100 local pickup only.
Yes I realize my location says CA, I'm in MD (21701) for the summer. All prices are o.b.o. I realize times are tough. I'm willing to work buyers and entertain offers, just don't make me look stupid.
Please try to communicate through this thread as much as possible and keep PM's to a minimum because my PM box fills up all the time.
Other than that, Thanks for looking and have a good one!
Sc400 motor mounts with 20K miles which were purchased last year from Lexus of Rockville. I went with custom poly motor mounts so these are up for grabs.
$50 for the pair + $12 shipping anywhere in the lower 48. Local pickup is welcomed.
2800 stall converter
Purchased from Lextreme for 95 SC400 and never installed.
SOLD Local pickup is welcomed.
Stock 92-96 SC300/SC400 front lip
Comes with all the aluminum mounting pieces. The lip was torn in two pieces and repaired. The lip isn't in all that great of condition and needs some DIY work and paint. The aluminum pieces need to be straightened.
$50 + $20 ship anywhere in the lower 48. Local pickup is welcomed.
92-96 SC300/400 front bumper cover w/ fogs
Is is dark green and in good condition.
$50 + $70 to ship anywhere in the lower 48. Local pickup is welcomed.
92-96 SC300/400 rear bumper cover
It is dark green and is in fair condition. No rips or tears but has cracked paint.
$30 + $60 to ship anywhere in the lower 48. Local pickup is welcomed.
Also I'd like to gauge interest in a 1uzfe engine partout.
The engine has 140K miles and is a 95 engine. Timing belt was done less than 10K miles ago. I'm talking intake plenums, injectors, rails, lower intake, heads, cams, pistons, rods, crank, block, TB, sensors, starter, AC comp, Alternator, PS pump, etc...
The engine is assembled as a long block currently and was a good runner before being removed for a lower mileage swap. If you need something let me know and I will give you a price on it.
a340e trans
It's from 95 SC400with 140K. No problems with it. It's currently attached to the motor. $100 local pickup only.
Yes I realize my location says CA, I'm in MD (21701) for the summer. All prices are o.b.o. I realize times are tough. I'm willing to work buyers and entertain offers, just don't make me look stupid.
Please try to communicate through this thread as much as possible and keep PM's to a minimum because my PM box fills up all the time.
Other than that, Thanks for looking and have a good one!
Last edited by UpInTheLex; 10-15-09 at 07:24 AM.
10-11-09 | 04:10 PM
#6
Trending Topics
10-13-09 | 11:54 AM
#12
The metal peices sandwich together with the bumper in the middle. One on top the corresponding piece on the bottom.
Anyway the metal peices are aluminum and straighten easliy by bending by hand and/or pliers.
OR...
Lots of guys install the lips with zip-ties and call it a day.
Anyway the metal peices are aluminum and straighten easliy by bending by hand and/or pliers.
OR...
Lots of guys install the lips with zip-ties and call it a day.
Last edited by UpInTheLex; 10-13-09 at 11:59 AM.
10-13-09 | 03:11 PM
#14
You guys are killing me with the pic requests! 
Prices are CHEAP, now somebody buy some parts!
I spent about 3 hours repairing the rip. I made a backer piece with the correct bent shape which I cut from an old bumper cover and trimmed it to fit. I swiss cheezed it before glueing to get good adhesion and I used grey 3M Duramix plastic repair epoxy. It's not a mickymouse repair. It's solid.
The hard part is done. Whats left is to repair a few more small rips, the largest is pictured below. The rest are mainly mounting tabs that don't really 'NEED' to be fixed.
I went Auto Couture and never finished this.
Is everybody happy now?!!?! lol
Prices are CHEAP, now somebody buy some parts!
I spent about 3 hours repairing the rip. I made a backer piece with the correct bent shape which I cut from an old bumper cover and trimmed it to fit. I swiss cheezed it before glueing to get good adhesion and I used grey 3M Duramix plastic repair epoxy. It's not a mickymouse repair. It's solid.
The hard part is done. Whats left is to repair a few more small rips, the largest is pictured below. The rest are mainly mounting tabs that don't really 'NEED' to be fixed.
I went Auto Couture and never finished this.
Is everybody happy now?!!?!
lol
Last edited by UpInTheLex; 10-13-09 at 03:23 PM.