jesod

What is your First & Last name? Jesse Sowards
What is your email? idrsowards@gmail.com
What is your phone number? -Optional: E-mail please.
What is your City? : Las Cruces
What is your State? : NM
What is your Zipcode? : 88007


I have a complete NA-T system for sale. This is set-up for a shortblock that has TT pistons or JE pistons or a headgasket that lowers the compression to around 8.5-9 to 1. All of these parts have less than 2,000 miles on them and are in great condition. The pictures on the Full-Race website and the First State Motorsports website for the SC300 are my actual car and the actual set-up/manifold that you will be receiving.

This is the retail breakdown for this set-up:

1. Full-Race manifold: ($2399) http://www.full-race.com/catalog/pro...oducts_id=1052 (that is the actual manifold that I'm selling on their website and my car).

2. FSM Intake Manifold Kit 2JZ-GE (front facing)
(1499.99 for Intake and the following)
Throttle Body
New Ford TPS
Throttle Body Gasket
Modified Toyota Throttle Cable
Custom Throttle Cable Adapter
Throttle Return Spring
Throttle Cable Stop
EGR Block Off Plate

3. Stage 2 Fuel System from FSM (about 2,000 for everything): Made for the SC300, if you have a Supra you would have to get a different hanger for the pumps:
2 Walbro Gss342
2 Walbro Install Kits
1 Marshall Liquid Filled FP Gauge
6 Precision 1000cc Injectors
6 Precision Injector Clips
1 Fuelab Fuel Pressure Regulator
1 Fuelab Fuel Filter
2 Bosch 30amp Relays
-8 Fuel Feed Line
All fittings and Line Included.
Hose Clamps, Connectors, etc..

Supports 700-900 Whp.

4. Garrett GT4094R ($1975 without the polished intake housing) 1.06 Turbine Housing:
http://www.full-race.com/catalog/pro...oducts_id=1678

5. AEM Part # AEM 30-1101 for Supra/SC300 (MSRP $2,540.41) with a rock solid Evans Tuning tuned for this set-up this tune holds at a solid 11.2 once it starts boosting and this hits the pump gas tune at 16.5psi at about 4000 rpm - killer street set-up that ran an 11.3 at 122 never ran it on race gas. Will make from 575 whp on pump gas at 16.5psi all the way to more than 750 on race gas.

6. (2) Tial 44mm Wastegates with 16.5psi springs ($349.00 X 2)http://www.full-race.com/catalog/pro...oducts_id=1765

7. 2jzge wiring harness with all sensors and wiring complete. ($600-900)

I would like to sell all of this together as it was all built and tuned to work together and separately just aren't worth what they are collectively, this is basically a turn-key system for an awesome set-up. If you add it all up the retail on this is about $12,000 worth of parts let alone being designed to work together perfectly.

I am willing to part with this for 5,000 shipped and paypaled. I think this will go fast so I'm going to be firm on this price until proven otherwise. Offers are still welcome and will be considered. Thank you for looking!

TroySC300

iTrader: (1)

Holy hell that's a deal. GLWS

1badsc

iTrader: (7)

how much for your inter coler pipping

96sc300

iTrader: (1)

If parting I would take a tial wastegate.

jesod

Thanks for your interest, not parting out at this time.

Intercooler piping and coupler are not A+ craftsmanship - very functional but not the prettiest welds. The intake pipe also has a tap for Nitrous.

96sc300

iTrader: (1)

This is off topic but this car is one bad *** sc build. Had the pleasure to see it run at englishtown. Josh built that car on point and spared not one penny to do It right. Awsome price for what u get.

sexusSC300

iTrader: (1)

damn, its nice to finally see someone sell something worth while on this forum.

...I have money in hand, pm me please

jesod

Yeah, this is such an amazing street set-up - it all works so good because the Full Race manifold is twin scroll mated to the Garrett GT4094R ball bearing turbo which is twin - scroll all feeding a FSM designed front facing intake manifold which has been flow tested and proven to put up huge numbers. It's definitely a winning combination!

Thanks for all the interest! All PMs replied - First with 5 grand will get this shipped to your door. Believe me this set-up will make your car go from Mild to Wild. This kind of set-up would definitely put your car in a class of it's own.

That-Guy

iTrader: (1)

what's happening with the rest of the car... i've been interested in this car for a long time... would love to see some recent pics of it and more info on the suspension setup... i tried contacting josh a couple months ago when i wanted to replicate the stance... but i was never able to actually get ahold of him.

pioww

last I knew this setup had Tein coilovers with the electronic control system. Not sure which exact coilovers. This car did dyno 700.1 hp on race gas. There is a video of it on youtube or some other video site. Can't remember right now, I'm tired. Josh is not at FSM anymore. Contact Dan. Leave a message if you call him, with a return phone number. It may take some time for him to get back to you, as he has been pretty busy. His customer service been pretty good.

This is a great deal. Makes me wish I had a N/A engine.

mr_mkelly

Is this set-up still for sale?

Im in the process of trying to find a nice sc to start with and think that this set-up could complete what im looking for. Im guessing that the bottom end was built to handle the hp of that big turbo?

S142jz

iTrader: (2)

Skould have an answer for you. Very intrested.

CLNSC3

iTrader: (4)

AMAZING deal... GLWS

mr_mkelly

Is this set-up still on market? whats the deal?

Carfreak70

iTrader: (16)

If it is still for sale, I really would be interested in the AEM...but I read you arent parting out, maybe thats changed?