TN FS: 2jzGE rebuilt cylinder head
06-06-10, 02:46 PM
#1
FS: 2jzGE rebuilt cylinder head
hey guys i am selling the cylinder head off of my 2jzGE.
it has been rebuilt at Headworks Nashville.
they replaced all the valve stem seals, valve seats, re-cut the valves, replaced two valves, re-shimmed all the buckets.
COMES WITH CAMS, CAM GEARS AND CAPS.
it has about 1500 miles on it since the rebuild.
this head runs PERFECTLY quietly.
price is 350 + shipping (it cost $385 just to have it rebuilt!)
it has been rebuilt at Headworks Nashville.
they replaced all the valve stem seals, valve seats, re-cut the valves, replaced two valves, re-shimmed all the buckets.
COMES WITH CAMS, CAM GEARS AND CAPS.
it has about 1500 miles on it since the rebuild.
this head runs PERFECTLY quietly.
price is 350 + shipping (it cost $385 just to have it rebuilt!)
11-04-11, 02:07 PM
#3
Driver School Candidate
Join Date: Nov 2011
Location: Virginia
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Ill take it!!!!
Hello,
i might be able to help you out with that head.We had a car towed in with a timing problem. I need to find a head due to the fact that someone else forgot about the secondary timing, and the car was towed in with bent valves, and there was also a hairline crack in the head, so we need both and your head would really help us out. thank you for your time!!! **btw, the engine is the 2JZ-GE, dual overhead cam, I6. thank you again!!
i might be able to help you out with that head.We had a car towed in with a timing problem. I need to find a head due to the fact that someone else forgot about the secondary timing, and the car was towed in with bent valves, and there was also a hairline crack in the head, so we need both and your head would really help us out. thank you for your time!!! **btw, the engine is the 2JZ-GE, dual overhead cam, I6. thank you again!!
04-03-12, 09:52 AM
#5
Lexus Test Driver
iTrader: (5)
Join Date: Jan 2008
Location: New York
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
i might be able to help you out with that head.We had a car towed in with a timing problem. I need to find a head due to the fact that someone else forgot about the secondary timing, and the car was towed in with bent valves, and there was also a hairline crack in the head, so we need both and your head would really help us out. thank you for your time!!! **btw, the engine is the 2JZ-GE, dual overhead cam, I6. thank you again!!
i might be able to help you out with that head.We had a car towed in with a timing problem. I need to find a head due to the fact that someone else forgot about the secondary timing, and the car was towed in with bent valves, and there was also a hairline crack in the head, so we need both and your head would really help us out. thank you for your time!!! **btw, the engine is the 2JZ-GE, dual overhead cam, I6. thank you again!!
I could have sworn the 2JZGE engines were non-interference....
bump for the OP.. nice looking head for, what I would consider, fairly cheap price..
Thread
Thread Starter
Forum
Replies
Last Post
