CA FS: TT brake kit, Custom exhaust, Tein CST, G35 19" Wheels, Sideskirts, Injen.
07-19-10, 11:09 PM
#1
Driver
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Utah
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
FS: Tein CST coilovers, G35 19" Wheels, Sideskirts
Located in the Bay Area. Prices OBO. I will now ship all items except wheels.
Supra TT Front brake upgrade (Calipers, Rotors, Shim, Hawk HP Pads 40%)
$SOLD
Supra MK4 Tein CST version 2 coilovers (One brand new damper in packaging, three dampers less than a year old)
These dampers are known to be the most comfortable ones money can buy. Drop is actually very good since these are made for the MK4 Supra
Price: $1000 OBO
FT: G35 19" iForged wheels (19lbs) by Rays w/ Nitto NT555 tires (80%/75% tread) for your stock wheels w/ tires
There are small sections of curb rash on all the wheels which resulted in the scraping of metallic paint on the surface of the wheel. All visual damage is easily repairable/repaintable.
Price:$650-800 depending on your wheels
AIT Vertex replica sideskirts (fenderub's)
Primered in black, lightly sanded, prepped for paint, ready for bolt on.
Price: $180
Custom axle back exhaust system (fenderub's exhaust setup)
This is the deepest exhaust setup you'll ever hear. Instantly makes people question if you really have a V6 under that hood. The packing material in these cans are made genuine TOYOTA JAPAN and is designed for you to slam your car and not scrape the exhaust. Megans have nothing on this.
Price: $SOLD
Injen intake CA CARB legal (pipe only)
A little dusty, but the intake is in great condition and I will include a coupler, clamps, and crank case hose
Price: $SOLD
Did I mention the car is on sale as well? $4800 here: https://www.clublexus.com/forums/lex...lue-sc300.html
Supra TT Front brake upgrade (Calipers, Rotors, Shim, Hawk HP Pads 40%)
$SOLD
Supra MK4 Tein CST version 2 coilovers (One brand new damper in packaging, three dampers less than a year old)
These dampers are known to be the most comfortable ones money can buy. Drop is actually very good since these are made for the MK4 Supra
Price: $1000 OBO
FT: G35 19" iForged wheels (19lbs) by Rays w/ Nitto NT555 tires (80%/75% tread) for your stock wheels w/ tires
There are small sections of curb rash on all the wheels which resulted in the scraping of metallic paint on the surface of the wheel. All visual damage is easily repairable/repaintable.
Price:$650-800 depending on your wheels
AIT Vertex replica sideskirts (fenderub's)
Primered in black, lightly sanded, prepped for paint, ready for bolt on.
Price: $180
Custom axle back exhaust system (fenderub's exhaust setup)
This is the deepest exhaust setup you'll ever hear. Instantly makes people question if you really have a V6 under that hood. The packing material in these cans are made genuine TOYOTA JAPAN and is designed for you to slam your car and not scrape the exhaust. Megans have nothing on this.
Price: $SOLD
Injen intake CA CARB legal (pipe only)
A little dusty, but the intake is in great condition and I will include a coupler, clamps, and crank case hose
Price: $SOLD
Did I mention the car is on sale as well? $4800 here: https://www.clublexus.com/forums/lex...lue-sc300.html
Last edited by sanengo; 08-10-10 at 10:53 AM.
07-20-10, 09:12 AM
#6
Driver
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Utah
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
scENFORCER - No way, they are stock height in the picture because I have to go through two ramps to get to work. They drop down to past the tire on 18" rims. I'm sure you can find pictures or I can look them up later.
Hil - I can do the work for you, and you can meet me up in Cerritos in September.
Hil - I can do the work for you, and you can meet me up in Cerritos in September.
Trending Topics
.
07-20-10, 12:17 PM
#12
Driver
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Utah
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Aha, you got me. But, I'm not kidding in the way it sounds... deep throaty rumble at low-rpm, and quiets down when you rev higher so you can hear the engine in all it's glory.
VanillaSC: I don't know if this will be compatible with the SC400, please check that first and I will gladly ship this to you.
VanillaSC: I don't know if this will be compatible with the SC400, please check that first and I will gladly ship this to you.
07-20-10, 02:17 PM
#14
behind him if you ship although im interested in a better price on them since they need new pads and a resurfacing (if they can be resurfaced)
also interested in the wheels but price is high, i got my first set for like 600 with NO damage and my 2nd set for like 400 with curbage like yours
also interested in the wheels but price is high, i got my first set for like 600 with NO damage and my 2nd set for like 400 with curbage like yours
07-20-10, 02:26 PM
#15
Driver
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Utah
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
sakataj, I am confident the brakes are worth the price I listed them for. They are no more than 2 years old and I've only put 6k miles on them personally. It doesn't need to be resurfaced, but I'm picky and I recommend it with any used brake install.
As for the wheels, the tires (Nitto NT555) were replaced at a cost of $700 this year and have almost all of the tread remaining. That means I'm only charging you no more than $300 for these rims themselves assuming ur stockies are worth a couple hundred themselves. These are also very expensive OE wheels that are made in Japan by RAYS and weigh in at around 19-20lbs each.
As for the wheels, the tires (Nitto NT555) were replaced at a cost of $700 this year and have almost all of the tread remaining. That means I'm only charging you no more than $300 for these rims themselves assuming ur stockies are worth a couple hundred themselves. These are also very expensive OE wheels that are made in Japan by RAYS and weigh in at around 19-20lbs each.