MD FS: Dakota Digital Tach Adapter
08-17-10, 07:03 AM
#1
Lexus Test Driver
Thread Starter
iTrader: (31)
Join Date: Aug 2006
Location: All Around Our Nation's Capital
Posts: 1,354
Likes: 0
Received 6 Likes
on
6 Posts
FS: Dakota Digital Tach Adapter
$50 Paypal shipped
I used this for about a year to run a TRD gauge cluster in my GS400. This will convert the tach signal from the engine/ecu/ignitor/etc so your tach will work. It can convert a 4cyl signal to work with a 8cyl cluster etc. This would work if you put a non VVT-i 2JZ in a 2nd gen GS. I still have the install instructions as well. If your doing any engine swap and it sends a different tach signal than your cluster is used to, you will need this & it's half what I paid.
Thanks,
Ki
I used this for about a year to run a TRD gauge cluster in my GS400. This will convert the tach signal from the engine/ecu/ignitor/etc so your tach will work. It can convert a 4cyl signal to work with a 8cyl cluster etc. This would work if you put a non VVT-i 2JZ in a 2nd gen GS. I still have the install instructions as well. If your doing any engine swap and it sends a different tach signal than your cluster is used to, you will need this & it's half what I paid.
Thanks,
Ki
Thread
Thread Starter
Forum
Replies
Last Post
