PA 100% complete Universal Air Ride system
05-16-11, 03:26 PM
#1
100% complete Universal Air Ride system
Up for grabs is my 100% complete Universal Air Ride system.
All the Wiring is done for you already minus a few odds and ends which i have labeled where they go for you. This system is 100% complete, there is nothing you will need to buy to run this.
This system was only on the car for 6 months, with maybe 1000 miles on the whole set up. No leaks at all.
Well over 2300$ spent here. 1900$ plus shipping takes it
What you get:
~4 UAS bags
~8 Plates for the bags
~2 Air Zenith OBDII air compressors
~2 stainless steal braided lines
~9 hole Air Tank (powder coated in chrome)
~1 Air Zenith pressure sensor unit
~Front and Rear solenoids made by ART
~2 Digital Air Zenith PSI gauges
~2 PSI sending units
~Fittings to block extra holes in the tank.
~Power wire
~A-Piller duel gauge pod for the PSI gauges
~3 switch's , 2 Up and down control switch's, 1 kill switch to cut power to the compressors
~ DOT approved Line
~ ALL fittings are Gator grip quick release fittings
-Optional-
4 Tein Basic dampers for an SCxxx with pillow ball mounts. You can choose to not have these shipped to you to help save on some of the shipping, but it will NOT reduce the price of the Air ride stuff. These were freebee's if you dont take them then i will be giving them to some one with an SC
All the Wiring is done for you already minus a few odds and ends which i have labeled where they go for you. This system is 100% complete, there is nothing you will need to buy to run this.
This system was only on the car for 6 months, with maybe 1000 miles on the whole set up. No leaks at all.
Well over 2300$ spent here. 1900$ plus shipping takes it
What you get:
~4 UAS bags
~8 Plates for the bags
~2 Air Zenith OBDII air compressors
~2 stainless steal braided lines
~9 hole Air Tank (powder coated in chrome)
~1 Air Zenith pressure sensor unit
~Front and Rear solenoids made by ART
~2 Digital Air Zenith PSI gauges
~2 PSI sending units
~Fittings to block extra holes in the tank.
~Power wire
~A-Piller duel gauge pod for the PSI gauges
~3 switch's , 2 Up and down control switch's, 1 kill switch to cut power to the compressors
~ DOT approved Line
~ ALL fittings are Gator grip quick release fittings
-Optional-
4 Tein Basic dampers for an SCxxx with pillow ball mounts. You can choose to not have these shipped to you to help save on some of the shipping, but it will NOT reduce the price of the Air ride stuff. These were freebee's if you dont take them then i will be giving them to some one with an SC
Last edited by JDMmuscle; 05-16-11 at 07:51 PM.
Trending Topics
05-17-11, 08:50 AM
#13
yeah man, Teins are included. As for the install, I could if you really wanted me to. But I would ask for some extra cash. Your call man, im very flexable.
Another option for you is i have all the wires labeled on where they need to go, and 90% of the electrical work is done for you. its a simple plug and play and just hiding wires man. i would rate it on a scale from 1-10 difficulty i would say about a 6 due to the fact that if you want a clean install and hid all the wires you will need to pull up some carpet.
Another option for you is i have all the wires labeled on where they need to go, and 90% of the electrical work is done for you. its a simple plug and play and just hiding wires man. i would rate it on a scale from 1-10 difficulty i would say about a 6 due to the fact that if you want a clean install and hid all the wires you will need to pull up some carpet.
05-17-11, 09:21 AM
#15
would love to have that set up, but i think i'm going to put my kit together myself. If you wanted to trade for BC + cash i could swing it. Ideal thing for me would be to buy this and then sell the bc but i dont have 2gs to swing at the moment. Either way GLWS!