CA FS:1996 SC300 Garage Sale Bonaza!
#1
FS:1996 SC300 Garage Sale Bonaza!
1. OBX Headers - this was purchased from another member here on the forums. After I got them I had a exhaust shop plug and relocate the 02 bung (as many of you know the factory bung with the 02 sensor installed rubs against the firewall). In addition I had a custom flange/extension piece fabricated to mate with the stock mid pipe so it's plug and play. I sprayed the headers with high temp matte black paint. Asking $200 or obo.
2. 1996 SC300 5spd Open Differential (pumpkin included) - not much to say, had no issues with it. Went with TT LSD and pulled it out at 140,000 miles. Seal around the yolk could use a replacing as it's hardened over time. Asking $75 or obo.
3. 1996 Fog Lights - these are in fair condition, have some minor scratches from normal wear and tear. Could use some tlc and some light sanding. Asking $30 or obo.****SOLD****
4. 1996 OEM Front and Rear Bumper - I would rate the bumpers a 6 out of 10. Front bumper has a large chip near the fog light from some road debris. Also some scratches on the under side if bumper. Rear bumper is in better condition as only significant damage is a melted exhaust outlet. The right side was partially melted due to an after market exhaust. Paint is still in great condition on both bumpers, all factory paint, never repainted. If you don't mind the minor blemishes you can mount them as is. Asking Price $85 or obo.
5. 1996 Door Moldings- great condition. Asking price $30 or obo.
6. Pre 97 Lip - was in the middle of prepping this for my 97 bumper but decided to go another route mid way. It is chopped in half , I've already custom fabricated the sheet metal for the extension and has been bolted together. Also, the previous owner cracked the lip on the lower passenger side. I've repaired it with bondo. Needs some additional sanding. Comes with majority of the mounting hardware. Asking $95 or obo. ***SOLD****
7. 1995 Supra Front Control Arms (R+L) - bought these used with 79,000 miles. Never ended installing them. Ball joints are in good condition. Asking $100 for the pair.
I will try to get some pictures up as soon as the weather clears up. I'd like to try to keep the larger items local, willing to ship the smaller ones. Prices are not including shipping. I'm located in Northern California ( East Bay).
2. 1996 SC300 5spd Open Differential (pumpkin included) - not much to say, had no issues with it. Went with TT LSD and pulled it out at 140,000 miles. Seal around the yolk could use a replacing as it's hardened over time. Asking $75 or obo.
3. 1996 Fog Lights - these are in fair condition, have some minor scratches from normal wear and tear. Could use some tlc and some light sanding. Asking $30 or obo.****SOLD****
4. 1996 OEM Front and Rear Bumper - I would rate the bumpers a 6 out of 10. Front bumper has a large chip near the fog light from some road debris. Also some scratches on the under side if bumper. Rear bumper is in better condition as only significant damage is a melted exhaust outlet. The right side was partially melted due to an after market exhaust. Paint is still in great condition on both bumpers, all factory paint, never repainted. If you don't mind the minor blemishes you can mount them as is. Asking Price $85 or obo.
5. 1996 Door Moldings- great condition. Asking price $30 or obo.
6. Pre 97 Lip - was in the middle of prepping this for my 97 bumper but decided to go another route mid way. It is chopped in half , I've already custom fabricated the sheet metal for the extension and has been bolted together. Also, the previous owner cracked the lip on the lower passenger side. I've repaired it with bondo. Needs some additional sanding. Comes with majority of the mounting hardware. Asking $95 or obo. ***SOLD****
7. 1995 Supra Front Control Arms (R+L) - bought these used with 79,000 miles. Never ended installing them. Ball joints are in good condition. Asking $100 for the pair.
I will try to get some pictures up as soon as the weather clears up. I'd like to try to keep the larger items local, willing to ship the smaller ones. Prices are not including shipping. I'm located in Northern California ( East Bay).
Last edited by huNGjaii; 10-26-11 at 08:47 PM.
#4
Here are some upclose pics of the flaws/blemishes I talked about.
Pic 1 - is of the lower underside of lip
Pic 2 - is of the melted exhaust outlet on rear bumper
Pic 3 - is scratch on the underside of rear bumper (can't notice once mounted)
Pic 4 & 5 - are of the scratches on the underside of the front bumper. I apologize about the mud, but it's been sitting outside for the last couple months.
If you guys need additional pictures and or have other questions, just shoot me a PM. Thanks.
Pic 1 - is of the lower underside of lip
Pic 2 - is of the melted exhaust outlet on rear bumper
Pic 3 - is scratch on the underside of rear bumper (can't notice once mounted)
Pic 4 & 5 - are of the scratches on the underside of the front bumper. I apologize about the mud, but it's been sitting outside for the last couple months.
If you guys need additional pictures and or have other questions, just shoot me a PM. Thanks.
Trending Topics
#8