MD Fs: mapecu3 Bnib with pnp 1jzgte jzz30 jumper harness
04-16-12, 05:41 PM
#1
Lexus Test Driver
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: Maryland
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Fs: mapecu3 Bnib with pnp 1jzgte jzz30 jumper harness
Name: Bryan
Location: baltimore
Price: $875 Obo
Contact: pm or email bryanc767@gmail.com
Decided to go a different route. This is a plug and play harness ($189) from autosport wiring that is a female jzz30 to male jzz30. I then wired in the mapecu3 harness (yellow wire goes to wideband output and grey can go to a switch to activate 2 step which I'll include. I used solder with flux aswell as heat shrink around each connection I then electrical taped the wires for more durability. Iv been wiring for a long time and have much experience.
The mapecu3 is still in the originial packaging and has never been used. Has all CDs and manuals aswell as the stickers. The mapecu3 is the top piggyback ecu out there. You can use it with any motor, any transmission. It connects through USB or wifi for ease of use. With this harness you will just connect a new vacuum hose from the map sensor to the ecu, plug the ecu into your computer and then upload one of the already hundreds of basemaps available. It's incredibly easy to tune that a novice can understand it. With the mapecu2 on 550cc injectors, r154 and a 60-1 turbo I made 457whp on my own tune.
If you have any questions feel free to contact me.
Location: baltimore
Price: $875 Obo
Contact: pm or email bryanc767@gmail.com
Decided to go a different route. This is a plug and play harness ($189) from autosport wiring that is a female jzz30 to male jzz30. I then wired in the mapecu3 harness (yellow wire goes to wideband output and grey can go to a switch to activate 2 step which I'll include. I used solder with flux aswell as heat shrink around each connection I then electrical taped the wires for more durability. Iv been wiring for a long time and have much experience.
The mapecu3 is still in the originial packaging and has never been used. Has all CDs and manuals aswell as the stickers. The mapecu3 is the top piggyback ecu out there. You can use it with any motor, any transmission. It connects through USB or wifi for ease of use. With this harness you will just connect a new vacuum hose from the map sensor to the ecu, plug the ecu into your computer and then upload one of the already hundreds of basemaps available. It's incredibly easy to tune that a novice can understand it. With the mapecu2 on 550cc injectors, r154 and a 60-1 turbo I made 457whp on my own tune.
If you have any questions feel free to contact me.
Last edited by bryan767; 04-16-12 at 05:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Diggzlex
LS - 1st and 2nd Gen (1990-2000)
2
10-08-12 05:12 PM
