PA 1uzfe complete SuperCharger set up
#1
Thread Starter
Joined: Feb 2007
Posts: 2,146
Likes: 6
From: State College, PA
1uzfe complete SuperCharger set up
Just like the title says, this is a complete Bolt on Supercharger set up to run 7lbs on your 1uzfe
No need for fabrication, No need to standalone. Complete bolt on, turn key horsepower!
The reason im parting it so soon is im going turbo.
A little about the set up:
This is just about as easy as you can get. all the fab work has been done for you, all the research and development. This use;s your factory sensors and ECU to incorporate 7psi of boost into your hungry 1uzfe. The supercharger has been completely redone to allow more flow!
All you have to do is remove your intake manifold, Bolt this sucker on and route a few pipes and vacuum lines and your screaming your way down the road!
Iv driven it a few times on this set up and it is peppy. Easily one of the coolest sounding cars iv driven. torque is instant, Throttle response is crazy and everyone next to you will break their neck staring. The Scream this thing makes is unbelievable
What you get:
~Intake manifold
~Supercharger (Ported m90) BRAND NEW BEARINGS
~Custom Idler pullys
~Custom boost pully (7psi, peaks to 8psi)
~Custom Fuel rails
~injectors
~Stainless fuel lines
~Custom plenum with IACV
~intake piping
~Extended serpentine belt
Comparison of Factory m90 vs the the one included with this kit
pic of the intake mani
Custom fuel rails
get a little peak at the 2 idler pulleys you get
Here it is on the car
Im asking $2,500 u.s OBO
No need for fabrication, No need to standalone. Complete bolt on, turn key horsepower!
The reason im parting it so soon is im going turbo.
A little about the set up:
This is just about as easy as you can get. all the fab work has been done for you, all the research and development. This use;s your factory sensors and ECU to incorporate 7psi of boost into your hungry 1uzfe. The supercharger has been completely redone to allow more flow!
All you have to do is remove your intake manifold, Bolt this sucker on and route a few pipes and vacuum lines and your screaming your way down the road!
Iv driven it a few times on this set up and it is peppy. Easily one of the coolest sounding cars iv driven. torque is instant, Throttle response is crazy and everyone next to you will break their neck staring. The Scream this thing makes is unbelievable
What you get:
~Intake manifold
~Supercharger (Ported m90) BRAND NEW BEARINGS
~Custom Idler pullys
~Custom boost pully (7psi, peaks to 8psi)
~Custom Fuel rails
~injectors
~Stainless fuel lines
~Custom plenum with IACV
~intake piping
~Extended serpentine belt
Comparison of Factory m90 vs the the one included with this kit
pic of the intake mani
Custom fuel rails
get a little peak at the 2 idler pulleys you get
Here it is on the car
Im asking $2,500 u.s OBO
Last edited by JDMmuscle; 05-19-12 at 07:04 AM.
Trending Topics
#12
Thread Starter
Joined: Feb 2007
Posts: 2,146
Likes: 6
From: State College, PA
Do it up man, My 1 off exhaust will be upsale here in a day or so. you could have a very nasty sc400 one of a kind
this set up was never dyno'd. It wont make gobs of power but the torque and throttle response is nuts. It felt very similar to a blown cobra mustang. Very very peppy
Ever since the cummins iv been addicted to the sound of turbo
thanks man
thanks! spread the word
1jozsc linked it for me
Thank you sir for looking out
Iv gotten ALOT of PM's about this, If you are thinking about buying this dont think to long. This will sell quickly
this set up was never dyno'd. It wont make gobs of power but the torque and throttle response is nuts. It felt very similar to a blown cobra mustang. Very very peppy
Ever since the cummins iv been addicted to the sound of turbo
thanks man
1jozsc linked it for me
Iv gotten ALOT of PM's about this, If you are thinking about buying this dont think to long. This will sell quickly
#14
Thread Starter
Joined: Feb 2007
Posts: 2,146
Likes: 6
From: State College, PA