WY SC300 The Green Monster
#1
Driver
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: in
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
South Bend custom clutch made for me (will clamp 900 foot lbs) $800 CL price: $400
Boost logic double weight fly-wheel (more rotating mass, faster spool) $600 CL price: $300
- Motor
2JZGE / NAT *Fully built by WPE Speed*
Hot tank acid dip ERL magniflux deck bore .20 over & hone $750
CP 8.5 Compression pistons $800 CL price : $500 (only 200 miles)
Eagle H-beam rods $550 CL PRICE$ 300
ARP head studs $190 CL price $140
TT Supra head gasket MLS $35
Crower 1 mm over size valves,l coil springs & titanium retainers $1200 CL price: $650
PWR 100% Kevlar timing belt $
ATI fluid dampener $550 CL price: $475
Injector dynamics 1000 CC saturated injectors $700 CL price: $500 (with clips; only 200 miles)Sold
One off fuel rail $175 CL price: $110
One off in-take manifold $1100 CL price: $900 (with Q45 TB)
Q45 throttle body $100
Custom aluminum IC piping 3" $750 CL price: $1,000 (will include clamps, couplers, & HKS SSQV BOV)
Couplers & T clamps $125
Precision front mount inter-cooler with brackets (the big one) cl price $375
Modified XS power turbo manifold clocked for 67 mm turbo to clear the dizzy$400 CL price: $200
4"V bands & dump $300 (KG made) CL price: $275
MSD 8.5 mm custom wires $350 CL price: $320 (50 miles) $295
HKS DLI ignition box $400 (direct plug & play for SC) CL price$320 (& I know there's a lot I am forgetting.)
Ttc 288 2jzge cams cl $800
![](http://bellprecisionrifles.com/forums/IMG_2230.jpged.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_2_34.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_3_5.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_4_3.jpg)
Boost logic double weight fly-wheel (more rotating mass, faster spool) $600 CL price: $300
- Motor
2JZGE / NAT *Fully built by WPE Speed*
Hot tank acid dip ERL magniflux deck bore .20 over & hone $750
CP 8.5 Compression pistons $800 CL price : $500 (only 200 miles)
Eagle H-beam rods $550 CL PRICE$ 300
ARP head studs $190 CL price $140
TT Supra head gasket MLS $35
Crower 1 mm over size valves,l coil springs & titanium retainers $1200 CL price: $650
PWR 100% Kevlar timing belt $
ATI fluid dampener $550 CL price: $475
Injector dynamics 1000 CC saturated injectors $700 CL price: $500 (with clips; only 200 miles)Sold
One off fuel rail $175 CL price: $110
One off in-take manifold $1100 CL price: $900 (with Q45 TB)
Q45 throttle body $100
Custom aluminum IC piping 3" $750 CL price: $1,000 (will include clamps, couplers, & HKS SSQV BOV)
Couplers & T clamps $125
Precision front mount inter-cooler with brackets (the big one) cl price $375
Modified XS power turbo manifold clocked for 67 mm turbo to clear the dizzy$400 CL price: $200
4"V bands & dump $300 (KG made) CL price: $275
MSD 8.5 mm custom wires $350 CL price: $320 (50 miles) $295
HKS DLI ignition box $400 (direct plug & play for SC) CL price$320 (& I know there's a lot I am forgetting.)
Ttc 288 2jzge cams cl $800
![](http://bellprecisionrifles.com/forums/IMG_2230.jpged.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_2_34.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_3_5.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_4_3.jpg)
![](http://bellprecisionrifles.com/forums/imagejpeg_6_3.jpg)
Last edited by 1badsc; 05-20-12 at 08:13 AM. Reason: updating list
#5
Lexus Test Driver
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thanks!
I have been talking to Dave and Andy at Southbend and they had told me that *If i want anymore more than 700FT TQ You will need a twin disc*
Their highest rated clutch for the R154 will hold 600 ft LBs so i am little confuse about what clutch you have that will hold 900 ft lbs tq.
http://www.dxdracingclutches.com/html/supra.html
Like i said i am very interested in this clutch!
I have been talking to Dave and Andy at Southbend and they had told me that *If i want anymore more than 700FT TQ You will need a twin disc*
Their highest rated clutch for the R154 will hold 600 ft LBs so i am little confuse about what clutch you have that will hold 900 ft lbs tq.
http://www.dxdracingclutches.com/html/supra.html
Like i said i am very interested in this clutch!
#6
Driver
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: in
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
900 hp my error and southbend does not make a twin only single jon is my rep their and he had it built for me thanks for your interest i have had great luck with them rps act etc dont last half as long
Thread
Thread Starter
Forum
Replies
Last Post
Sewell
Club Lexus Vendor Marketplace
53
04-20-13 08:25 AM