dawhorl21

7mgte 440cc injectors sold
7mgte cps $50
sc300 break booster and master cylinder $75
1jzgte coil packs $150
1jzgte yellow side feed injectors $50
2jzge stock 330cc injectors $50
92 sc300 auto ecu sold
92 sc300/400 fuel pump control unit $20
sc300 tapped oil pan $60
is300 stock injectors $50 (comes with fuel rail)
is300 block and crank the block has been bored out .020 over and the crank has been polished and balanced. $250
is300 stock cams $80
2jzge vvti solenoid $100
there is alot more pm me what you need and see if i have it.
i am also parting out a 2jzge

SEIDO

iTrader: (1)

What sort of difference can be expected from the bored block & lightened crank?
(I have a CAI, and exhaust only...)

1WILLY1

iTrader: (9)

ill buy your tan floor mats , please tell me how to send you payment


pm sent

Supra Dr

iTrader: (14)

Long time member, but need a vouch due to the total $$ amount of the sale.

dawhorl21

with a bored block you get bigger pistons.. so you would need .020 over pistons and rings but you will feel more power/acceleration. i had the crank polished and balanced cause i was gonna build the engine. it just means the bearing surface is smooth and no scaring. they just balance it to make sure there will be no vibration at high rpm or during normal operation

dawhorl21

trying to get that taken care of... i didnt know that was a rule>>>what if you dont know anyone with 500+ posts?

6SOARER

iTrader: (20)

Is the tapped oil pan the upper or lower part of the pan? Where in Ca are you?

dawhorl21

pictures of the 7mgte 440's,,,,,, is300 injectors

and is300 block (if you want a complete bottom end i can also assemble that for you)

dawhorl21

i tapped the drain hole in the upper part of the pan. there is a push lock fitting in it now but if you dont need it i will take it out

SC400DAVE

If you sell it locally and have the stuff picked up, then you do not need a vouch. It's only if you are shipping stuff for the protection of the buyer. Good luck with your sale.

dawhorl21

thank you for the info. appreciate all the help i can get

Supra Dr

iTrader: (14)

You can sell it locally or if you have a long membership w/ high feedback on another forum
PM me a link to review.

I feel your pain, I can't sell any of my toy truck stuff on pirate 4x4 due to post count/ 5 years +
membership. Even w/ being a mod here & 9+ years on supraforums w/+ feedback.
Rules are rules.........

S142jz

iTrader: (2)

Do you have the serpentine belt tensioner ?

TheRonTom3

iTrader: (5)

Whats the gearing on the sc300 diff?

Willing to ship to saratoga ny 12866?

dawhorl21

Pictures of ECU: