VA wtb: TT ECU Swap parts/NA-t parts
07-16-13, 06:56 PM
#1
wtb: TT ECU Swap parts/NA-t parts
Im planning on tackling the TT Ecu swap on my 1992 non vvti SC300. I'm going NA-t, I already have my manifold, Turbo, intercooler with piping, 3" DP, BOV, waste gate, 440cc injectors, and a JDM TT ecu out of an aristo. I need the following (If I am missing anything please let me know):
-DS62 or DH61 Ignitor (Purchased)
-VVTi Coilpacks (i believe these are the only ones that will fit under my intake manifold) (Purchased)
-MAP Sensor (purchased)
-IAT sensor (purchased)
-Extra pins for the harness/or old harness
(this is what my estimate is that i still need for the ECU swap Please let me know if im missing anything)
for the NA-T I still need
- 3" Exhaust from the DP back
- 3"-4" Intake Pipe from the turbo with or without air filter
-BOV (the one I have now is a knock off and the vaccum line connector on the top is broken)
-IS300 Union Bolt for oil feed.
-Oil feed line and return with fittings. (Purchased)
-ARP Studs (Purchased)
-TT HG (Purchased)
- intank hiflow Fuel Pump (Purchased)
I believe that should be all i need, If im missing anything please let me know Im in northern VA in the DMV area
Moe
call or text 703-624-1900
email mkhank7865@gmail.com
-DS62 or DH61 Ignitor (Purchased)
-VVTi Coilpacks (i believe these are the only ones that will fit under my intake manifold) (Purchased)
-MAP Sensor (purchased)
-IAT sensor (purchased)
-Extra pins for the harness/or old harness
(this is what my estimate is that i still need for the ECU swap Please let me know if im missing anything)
for the NA-T I still need
- 3" Exhaust from the DP back
- 3"-4" Intake Pipe from the turbo with or without air filter
-BOV (the one I have now is a knock off and the vaccum line connector on the top is broken)
-IS300 Union Bolt for oil feed.
-Oil feed line and return with fittings. (Purchased)
-ARP Studs (Purchased)
-TT HG (Purchased)
- intank hiflow Fuel Pump (Purchased)
I believe that should be all i need, If im missing anything please let me know Im in northern VA in the DMV area
Moe
call or text 703-624-1900
email mkhank7865@gmail.com
Last edited by VAgs430; 07-28-13 at 04:27 PM.
07-17-13, 10:27 AM
#3
for the vvti coils you do not want to use a TT ignitor, you can use either a DS62 (toyota v6 ignitor) or a DH61 (vvti ignitor). The DS62 you can find on ebay for cheap and is the way to go, you want to get one that has the clip with some wires left on it if possible. good luck.
