WTB or TRADE FOR CLUSTER
#1
Keeper of the light
Thread Starter
iTrader: (17)
WTB or TRADE FOR CLUSTER
My cluster has been through it all, i'm going to give it a rest and get a guinea pig cluster.
I will either give 50 bucks for a toasted, roasted, used and abused cluster or i'll hook you up with a set of Hyper blue or Satin white needles.
I already have an ES cluster for chopping, i need an SC now. C'mon guy's!!
Thanks.
I will either give 50 bucks for a toasted, roasted, used and abused cluster or i'll hook you up with a set of Hyper blue or Satin white needles.
I already have an ES cluster for chopping, i need an SC now. C'mon guy's!!
Thanks.
#2
By golly.....
AudioGodz?? You do get around, my friend.
The needles went out to you today USPS overnight. Thanks again for the support.
I need an odd part for my cluster I discovered missing. when I had it appart. It is some sort of U shaped heat sink bracket held in place by a single nut and bolt. It has one for one chip (nut and bolt was missing otherwise), but there is an identical chip that has it's heat sink bracket missing. Hopefully you have an odd one laying around what with all your R&D on these things. Very weird that it's missing.
As to the cluster bulbs:
- I need a bulk (read 10-12) of the Sylvania 24's. I tested them and just about every one is burned out. They ARE a challenge to pull out of their holders. Do you have a bulk supply source?
- A couple of them would light when a direct 12V was applied to the holder contacts, but still wouldn't light when mounted in the cluster. Very odd. Any insight on this problem?
- Also, a couple of the smaller bulbs (please advise part number) are burned out, so need to replace them also.
It's interesting the subtle design differences between a '93 and a "94, and even a '95 sc400 cluster design. Those Lexus engineers sure did like to play.
The needles went out to you today USPS overnight. Thanks again for the support.
I need an odd part for my cluster I discovered missing. when I had it appart. It is some sort of U shaped heat sink bracket held in place by a single nut and bolt. It has one for one chip (nut and bolt was missing otherwise), but there is an identical chip that has it's heat sink bracket missing. Hopefully you have an odd one laying around what with all your R&D on these things. Very weird that it's missing.
As to the cluster bulbs:
- I need a bulk (read 10-12) of the Sylvania 24's. I tested them and just about every one is burned out. They ARE a challenge to pull out of their holders. Do you have a bulk supply source?
- A couple of them would light when a direct 12V was applied to the holder contacts, but still wouldn't light when mounted in the cluster. Very odd. Any insight on this problem?
- Also, a couple of the smaller bulbs (please advise part number) are burned out, so need to replace them also.
It's interesting the subtle design differences between a '93 and a "94, and even a '95 sc400 cluster design. Those Lexus engineers sure did like to play.
Last edited by dahozzman; 07-15-03 at 10:01 PM.
#4
Keeper of the light
Thread Starter
iTrader: (17)
They ARE a challenge to pull out of their holders. Do you have a bulk supply source?
Also, a couple of the smaller bulbs (please advise part number) are burned out, so need to replace them also.
#6
Keeper of the light
Thread Starter
iTrader: (17)
See, I told you Tony was the man
gimme gimme gimme lol.
I knew you were busy T, so i was trying to get another sooner because i figured you'd not have time for it at this point. i'm getting desperate to do this trick cluster i have in mind. Hope you get a moment to breathe soon amigo. all that running isn't easy on your constitution.
................ and thanks!
gimme gimme gimme lol.
I knew you were busy T, so i was trying to get another sooner because i figured you'd not have time for it at this point. i'm getting desperate to do this trick cluster i have in mind. Hope you get a moment to breathe soon amigo. all that running isn't easy on your constitution.
................ and thanks!
Thread
Thread Starter
Forum
Replies
Last Post