Which Kit Do You Like Best?
#211
Lexus Test Driver
Was looking around for how much those Behrman fenders are their 92,400 yen
I think there is an LED indicator in those vents..
Lag Gee DMD which is produced in atmosphere (the dual marker & the duct fender) the UZZ40 sailplane/it is for rec suspension SC system. You can use the part which radiates as a side marker. Being able to give angle in LED, because we have arranged, it satisfies function as a turn signal use and, as a safety standards conformity item is possible. Because it is the finished product of FRP, the sufficient you exchange with the genuine fender you can install simply. It can lock also installation entirely at genuine hole position. It is the not yet paint item and the left and right set one unit. Popular item of patent application being completed, price 92400 Yen. It is the WISESQUARE product.
As for the fender it is not the over fender at genuine size, but by cutting the lapel of the arch section whether installing the wide tire possibility you think. As for net size of duct wind, at maximum W180mm×H120mm. As for fin length 320mm underneath being short, the luminous lens part of 280mmLED is 180mm with the one where the top is long. Because also the base of the fin is FRP, painting favorite in color, please install. The duct wind net with ABS make has become the eggshell finish of black.
As for the fender it is not the over fender at genuine size, but by cutting the lapel of the arch section whether installing the wide tire possibility you think. As for net size of duct wind, at maximum W180mm×H120mm. As for fin length 320mm underneath being short, the luminous lens part of 280mmLED is 180mm with the one where the top is long. Because also the base of the fin is FRP, painting favorite in color, please install. The duct wind net with ABS make has become the eggshell finish of black.
#214
Moderator
iTrader: (4)
Or you buy the ones from Garage Answer. Much cheaper.
Wald and JobDesign also make fenders for this car.
Or you get creative like this one.
BTW, all the pics I have been posting on this forum so far are for information purposes only.
#215
Lexus Test Driver
Wisesquare just told me they can do the Behrman ones for 68,000 yen which is not too bad considering as its the whole fender and your never going to archieve the same moulding effect with the G answer ones.
Im tempted.. gotta find out how much shipping and fitting will set me back
#216
Moderator
iTrader: (4)
Thanks talwang, are those Garage answer LED as well ?
Wisesquare just told me they can do the Behrman ones for 68,000 yen which is not too bad considering as its the whole fender and your never going to archieve the same moulding effect with the G answer ones.
Im tempted.. gotta find out how much shipping and fitting will set me back
Wisesquare just told me they can do the Behrman ones for 68,000 yen which is not too bad considering as its the whole fender and your never going to archieve the same moulding effect with the G answer ones.
Im tempted.. gotta find out how much shipping and fitting will set me back
68,000 Yens is a very good deal.
And you are right about the shipping fee which will be outrageous due to the size.
I bought a full size trunk carpet (not available in US) last year and the EMS shipping fee was almost $80.
Last edited by talwang; 08-13-07 at 11:28 AM.
#217
Lexus Test Driver
Behrman side fenders 68000 yen
Behrman Roof finisher ルーフフィニッシャー 42000yen
Behrman Rear wing リアウイング 30000yen
68000+42000+30000=140000yen
The article is delivery in Japan.
The postage to the U.K. depends on 180,000 yen by air transportation. You
please arrange the other transportation means.
Thank you.
Behrman Roof finisher ルーフフィニッシャー 42000yen
Behrman Rear wing リアウイング 30000yen
68000+42000+30000=140000yen
The article is delivery in Japan.
The postage to the U.K. depends on 180,000 yen by air transportation. You
please arrange the other transportation means.
Thank you.
Must be 40,000yen shipping
#222
Some new pics of uzz40 with Answer lip kit and modified stock sideskirts (or new Answer sideskirts?) done by T's Project.
BTW, these are for the pre-06, don't be misled by its 06+ headlights.
If you have done ur homework well, then you should be able to spot the difference right away.
BTW, these are for the pre-06, don't be misled by its 06+ headlights.
If you have done ur homework well, then you should be able to spot the difference right away.
#224
Moderator
iTrader: (4)
Those JD kits were on an auction in Japan, but it never received a bid even BIN price was well below the MSRP.
The only US dealer for JobDesign's product will be P.G. MOTORING.
http://www.jobdesignusa.com/dealers.htm
The only US dealer for JobDesign's product will be P.G. MOTORING.
http://www.jobdesignusa.com/dealers.htm