Anyone know if 06 SC tails will fit on the pre-06?
#35
Led 06
well, let me get in now on this thread for email keepup... i'm interested in it too...
will need a load resistor, as most LED bulb makers sell these...
i was looking into just getting some LED bulbs actually....
btw, on my 02, my inside dome bulb went out and then my lic plate bulb; easy change. but then tonight, i noticed my front lamp housing parking light (the vertical slit/outer most light) is OUT too on driver's side....
i was thinking of changing this one to a more whiter/bluish bulb....did any one do this and any suggestions on where i can get this bulb? also, while i'm at it, i want to change my 4300K HID to a 6000K bulb.... saw them at xenonpros.com for $155 a pair.... no different than the philips ultinon 6K at $255. .... is it hard to change the d2s or r, whichever, bulbs in our SCs???
james R
so calif
02 sc430 silver/ecru
will need a load resistor, as most LED bulb makers sell these...
i was looking into just getting some LED bulbs actually....
btw, on my 02, my inside dome bulb went out and then my lic plate bulb; easy change. but then tonight, i noticed my front lamp housing parking light (the vertical slit/outer most light) is OUT too on driver's side....
i was thinking of changing this one to a more whiter/bluish bulb....did any one do this and any suggestions on where i can get this bulb? also, while i'm at it, i want to change my 4300K HID to a 6000K bulb.... saw them at xenonpros.com for $155 a pair.... no different than the philips ultinon 6K at $255. .... is it hard to change the d2s or r, whichever, bulbs in our SCs???
james R
so calif
02 sc430 silver/ecru
#38
exclusive matchup
iTrader: (4)
Originally Posted by JJRHO
well, let me get in now on this thread for email keepup... i'm interested in it too...
will need a load resistor, as most LED bulb makers sell these...
i was looking into just getting some LED bulbs actually....
btw, on my 02, my inside dome bulb went out and then my lic plate bulb; easy change. but then tonight, i noticed my front lamp housing parking light (the vertical slit/outer most light) is OUT too on driver's side....
i was thinking of changing this one to a more whiter/bluish bulb....did any one do this and any suggestions on where i can get this bulb? also, while i'm at it, i want to change my 4300K HID to a 6000K bulb.... saw them at xenonpros.com for $155 a pair.... no different than the philips ultinon 6K at $255. .... is it hard to change the d2s or r, whichever, bulbs in our SCs???
james R
so calif
02 sc430 silver/ecru
will need a load resistor, as most LED bulb makers sell these...
i was looking into just getting some LED bulbs actually....
btw, on my 02, my inside dome bulb went out and then my lic plate bulb; easy change. but then tonight, i noticed my front lamp housing parking light (the vertical slit/outer most light) is OUT too on driver's side....
i was thinking of changing this one to a more whiter/bluish bulb....did any one do this and any suggestions on where i can get this bulb? also, while i'm at it, i want to change my 4300K HID to a 6000K bulb.... saw them at xenonpros.com for $155 a pair.... no different than the philips ultinon 6K at $255. .... is it hard to change the d2s or r, whichever, bulbs in our SCs???
james R
so calif
02 sc430 silver/ecru
#40
Lexus Fanatic
iTrader: (2)
Many of the lights on thes cars are a challenge. Especially the foglights which require patience beyond the normal man is capable of as the design is ridiculous. Parking lights are still a challenge but doable with a little patience. Drivers headlight is a little challenging vs the passenger side.
Lee
Lee
#41
exclusive matchup
iTrader: (4)
Originally Posted by Pearlpower
Many of the lights on thes cars are a challenge. Especially the foglights which require patience beyond the normal man is capable of as the design is ridiculous. Parking lights are still a challenge but doable with a little patience. Drivers headlight is a little challenging vs the passenger side.
Lee
Lee
#42
changing H lights d2s
yeah, elaborate.. do you have to remove the light housing out of the fender/hood area or remove any air boxes,etc ? i'm also in need of chaning the parking light so...
j.rho
j.rho
Thread
Thread Starter
Forum
Replies
Last Post
playa3uhh
SC430 - 2nd Gen (2001-2010)
21
02-01-11 07:27 AM