sc430blue

Lee, did you ever resolve the high rpm dropoff on your RMM setup? I am wondering if the headers would help with FI cars.

GILLEXUS

iTrader: (14)

Most definitely JP430 is the only one that has posted any FI/ S&S header results. He had the LMS S/C intalled and dynoed his car just after the S/C install and after the header install.It was done on a Mustang dynoed it is in MPH as oppose to RPM.
+43rwhp +37rwtq

https://www.clublexus.com/forums/sho...4&page=5&pp=15

cartechpr

If i knew it were going to be only 17rwhp i would have left as is... i am in the middle of the install ....

Driver side is really awful.

Pearlpower

iTrader: (2)

Forget the hp peak, the tq is where it is at with the headers. Huge drivability improvements in the car.

RMMGS4

iTrader: (5)

Actually that's roughly $40 per HP gain. (Lets talk parts cost not incl labor) Pretty good compared to what you might get from an SRT intake.

I'm sure most have spent more than $500 on an exhaust and the gain is def not 17HP.

Take a supercharged RMM Supercharger set up. YOU WILL BE LUCKY if you can yield $40 per HP going FI (again parts cost w/o factoring in labor).

THERE ARE NO MODS for Lexus that will yield significantly more power per dollar than this.

You gotta pay to play.

And I guess if you wanna save money on labor, sometimes you gotta bleed to play.

GILLEXUS

iTrader: (14)

ONLY 17RWHP?? don't forget 28lbs RWTQ. I know the install is more involved than simple plug n play headers but those #'s are pretty good for headers. It is usually the big bore engines and FI engines that get big #'s by adding a header. just my $.02

Plus this mod will greatly benefit and increase the HP & TQ #'s if you decide to go FI.
What problems are you running into w/ the driver's side?

Pearlpower

iTrader: (2)

As posted above in my install tips, be careful of the dipstick on the drives side. This plus the steering wheel coupler makes things more complicated but easily doable with patience. Bending the dipstick is not an option as it supposed to seal on the bottom into the oil pan. Otherwise there will be a leak.

Mark the steering wheel coupler well to avoid a misaligned wheel. Otherwise you can just correct it by pulling the steering wheel as access to the coupler is difficult with the cat bolted up.

Let us know if we can be of more help. PM me for my number if you feel a phone call would help
Lee

tonydt1g3r

Does the GS430 and the SC430 use the same headers?

JBrady

Yes.......

rominl

iTrader: (4)

haha yeah of course that's pretty much the same one lee got

Nguy3n06

so basically in the video that you post.... whats all in your car at that time..???

im guessing \
srt intake
ss headers
Blitz exhaust
anything else???

im asking because i just ordered ss headers and blitz exhaust system.. i have the exhaust system at my house now and im waiting for my headers to head in lol and oi wante dto get a feel on how the car is going to sound....

i have weapon R intake and soo to be putting on the other mods...is there somewhere i can go to just hear the Blitz exhaust??

oh yeah by the wayy im loving your car man... VERY NICE JOBB!!

tonydt1g3r

ok how about GS430, SC430 headers fit on a tundra? or the GS430/SC430 headers on a GS400/SC400

Seize

Judging by the numbers on the dyno. It looks like everything was well worth the effort!

Pearlpower

iTrader: (2)

He He
SOrry for not replying to your email Tony but I have not had a chance to go out in the garage to match up my Tundra and SC manifolds. Will see later but I do not believe so.
Lee

rominl

iTrader: (4)

i think it might have more to do with the clearance? with lee around, i guess we have our best resource