Pics of my car
#1
Pics of my SC430 with mix and match AimGain, Wald, Tom's, G-Answer, Kazama kits
Wheels/Chassis/Suspension/Brakes:
20" System Forged Trinidad
Continental ExtremeContact DWS 245/35/20, 275/30/20
McGard Splinedrive lugs and wheel locks
Orange TPMS
Tein CST Coilovers <------- I want air suspensions. lol
Tein EDFC
Daizen Sway Bars
TunedParts Billet rear Member Braces
Front 14" Rotora 4 piston BBK and Rear Stoptech Rotors with SS Brake lines
Tom's LCB
Engine:
Injen Intake w/Heat Shield
Sun Hyper Voltage System Type MR
Tom's Exhaust
MPS
Blitz Throttle Controller with Reverse Cancel Harness
Carbing Cooling Plate
Optima RedTop with Figs Battery Tie Bar
Body Kit:
AimGain Front bumper with 2010 LS460 Foglights
Wald Side Fenders
G-Answer Rear Bumper Lip
Tom's Roof Spoiler
Kazama Luxor Sideskirts
Other:
Venture Clear Bra Protection Kit
Junction Produce Fusa
Junction Produce Gintsuna
Valentine One Radar Detector
Kuda Phonebase
06 Tail Light w/Ecu
Front Clear LED Sidemarkers
V-leds 6000K DRL/Highbeam
Philip 6000K HID Foglight
Luxur1 LED Interior Lights
Bellezza Neck Pads
Junction Produce Hip Pads
AutoCouture Crystal Emblem
Navi Tool with Kenwood Backview camera
2006 Headlight Conversion with 6000K PIAA D4S HID Bulbs
Toyota Japan OEM full size rear trunk mat for Soarer
Tom's Carbon Fiber Scuff Plate Overlays, Toyota Japan OEM non-Smoker Box, Toyota Japan OEM Front Grille Soarer Emblem (Free from Dan_K)
20" System Forged Trinidad
Continental ExtremeContact DWS 245/35/20, 275/30/20
McGard Splinedrive lugs and wheel locks
Orange TPMS
Tein CST Coilovers <------- I want air suspensions. lol
Tein EDFC
Daizen Sway Bars
TunedParts Billet rear Member Braces
Front 14" Rotora 4 piston BBK and Rear Stoptech Rotors with SS Brake lines
Tom's LCB
Engine:
Injen Intake w/Heat Shield
Sun Hyper Voltage System Type MR
Tom's Exhaust
MPS
Blitz Throttle Controller with Reverse Cancel Harness
Carbing Cooling Plate
Optima RedTop with Figs Battery Tie Bar
Body Kit:
AimGain Front bumper with 2010 LS460 Foglights
Wald Side Fenders
G-Answer Rear Bumper Lip
Tom's Roof Spoiler
Kazama Luxor Sideskirts
Other:
Venture Clear Bra Protection Kit
Junction Produce Fusa
Junction Produce Gintsuna
Valentine One Radar Detector
Kuda Phonebase
06 Tail Light w/Ecu
Front Clear LED Sidemarkers
V-leds 6000K DRL/Highbeam
Philip 6000K HID Foglight
Luxur1 LED Interior Lights
Bellezza Neck Pads
Junction Produce Hip Pads
AutoCouture Crystal Emblem
Navi Tool with Kenwood Backview camera
2006 Headlight Conversion with 6000K PIAA D4S HID Bulbs
Toyota Japan OEM full size rear trunk mat for Soarer
Tom's Carbon Fiber Scuff Plate Overlays, Toyota Japan OEM non-Smoker Box, Toyota Japan OEM Front Grille Soarer Emblem (Free from Dan_K)
Last edited by talwang; 07-22-11 at 10:49 PM. Reason: updates
#2
very nice man, clean looking car! it can definitely use more lowering
and hahaa, no one can see the tom's roof spoiler, hahaha...... but the front lip looks very nice on your car!
and hahaa, no one can see the tom's roof spoiler, hahaha...... but the front lip looks very nice on your car!
#6
it's so clean, you can eat sphagetti off the hood.
I'm loving the front lip cause it has a very nice crisp shape to it.
the back lip has smooth lines as well.
Care to join our all sc430 meet on 4/29 in San Luis Obispo?
It's only a mere 2500 miles and one day and a half of driving from TX to CA for you.
We have the same color combo, GO silver and black!
I'm loving the front lip cause it has a very nice crisp shape to it.
the back lip has smooth lines as well.
Care to join our all sc430 meet on 4/29 in San Luis Obispo?
It's only a mere 2500 miles and one day and a half of driving from TX to CA for you.
We have the same color combo, GO silver and black!
Trending Topics
#8
Originally Posted by rominl
very nice man, clean looking car! it can definitely use more lowering
and hahaa, no one can see the tom's roof spoiler, hahaha...... but the front lip looks very nice on your car!
and hahaa, no one can see the tom's roof spoiler, hahaha...... but the front lip looks very nice on your car!
Yes, I think it needs to be lowered a little more when my Tein CS comes, but I swear to God that gaps look much bigger in pics for some reason.
0.7"/front and 1.03"/rear by Tein H-Tech are not enough for this car.
The ride quality is pretty much the same with stock. I really can't tell the difference.
Hmm.. I guess it is the shape of the tire. The sidewall is not flat || and looks very stretched / \.
No one can really tell I have the roof spoiler and the rear lip, but it is ok lah.
#10
Originally Posted by teeman3
it's so clean, you can eat sphagetti off the hood.
I'm loving the front lip cause it has a very nice crisp shape to it.
the back lip has smooth lines as well.
Care to join our all sc430 meet on 4/29 in San Luis Obispo?
It's only a mere 2500 miles and one day and a half of driving from TX to CA for you.
We have the same color combo, GO silver and black!
I'm loving the front lip cause it has a very nice crisp shape to it.
the back lip has smooth lines as well.
Care to join our all sc430 meet on 4/29 in San Luis Obispo?
It's only a mere 2500 miles and one day and a half of driving from TX to CA for you.
We have the same color combo, GO silver and black!
Love to see the Wald kit you have, I have never seen one in person before.
Can you believe that?
All of the SC430s I have seen here in Houston are stock and most of them are driven by females.
I have about 80 zaino layers on my SC so far, and I heard that you have 100+ layers.
I guess we are the same kind of people who just can't stand to see any dust on our cars.
Believe it or not, I practically clean this car almost everyday.
#11
Originally Posted by talwang
ha! my thread was moved here.
Yes, I think it needs to be lowered a little more when my Tein CS comes, but I swear to God that gaps look much bigger in pics for some reason.
0.7"/front and 1.03"/rear by Tein H-Tech are not enough for this car.
The ride quality is pretty much the same with stock. I really can't tell the difference.
Hmm.. I guess it is the shape of the tire. The sidewall is not flat || and looks very stretched / \.
No one can really tell I have the roof spoiler and the rear lip, but it is ok lah.
Yes, I think it needs to be lowered a little more when my Tein CS comes, but I swear to God that gaps look much bigger in pics for some reason.
0.7"/front and 1.03"/rear by Tein H-Tech are not enough for this car.
The ride quality is pretty much the same with stock. I really can't tell the difference.
Hmm.. I guess it is the shape of the tire. The sidewall is not flat || and looks very stretched / \.
No one can really tell I have the roof spoiler and the rear lip, but it is ok lah.
it's funny coz' most people they cant' tell my wald kits but they can tell the roof spoiler right the way