Lx-mode Lip ( 2006 )
10-16-06, 02:27 PM
#1
Pole Position
Thread Starter
Join Date: Aug 2005
Location: CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Lx-mode Lip ( 2006 )
It arrived today !
I jumped right on the install , great fit & finish, It 's urethane and very easy to adjust since it is flexiable.
I drilled one hole 9/64 to hold the sides on first, there are two screws per side.
There is a silicone seal that runs the entire length at the top that will stop any rubbing on the two surfaces.
Marked the height on the bumper ( top) with a washable marker,
I then used the 3m supplied pre-stick pad since there is a 1/4 doubled sided tape on this assy, there also is four brackets that hold the assy on and support it very well.
I attached the two side brackets to the existing 3/8 sheet metal screws that attach the main bumper assy on the 430.
Holding the bumber in place I pulled the double sided tape from the top and pressed the bumper in place , since the sides were in place all I had to do is raise the lip to the correct height and press on.
I then drilled the last two holes on the sides, drilled two 3/8 holes for the center brackets and it was a done deal.
There was instructions , but not in english..
The lux mode is the best fitting lip that I have seen , and the seal is really top notch Quality and the color match( 065) was perfect.
I only had to use a jack enough 3' inches so my long screw driver would work , and to drill two two 3/8 holes was no big deal.
Everything really fit well, and it was worth the price paid for the product quality and paint.
I will try to upload some pic's in the gallery
Later
Gee-Bee
I jumped right on the install , great fit & finish, It 's urethane and very easy to adjust since it is flexiable.
I drilled one hole 9/64 to hold the sides on first, there are two screws per side.
There is a silicone seal that runs the entire length at the top that will stop any rubbing on the two surfaces.
Marked the height on the bumper ( top) with a washable marker,
I then used the 3m supplied pre-stick pad since there is a 1/4 doubled sided tape on this assy, there also is four brackets that hold the assy on and support it very well.
I attached the two side brackets to the existing 3/8 sheet metal screws that attach the main bumper assy on the 430.
Holding the bumber in place I pulled the double sided tape from the top and pressed the bumper in place , since the sides were in place all I had to do is raise the lip to the correct height and press on.
I then drilled the last two holes on the sides, drilled two 3/8 holes for the center brackets and it was a done deal.
There was instructions , but not in english..
The lux mode is the best fitting lip that I have seen , and the seal is really top notch Quality and the color match( 065) was perfect.
I only had to use a jack enough 3' inches so my long screw driver would work , and to drill two two 3/8 holes was no big deal.
Everything really fit well, and it was worth the price paid for the product quality and paint.
I will try to upload some pic's in the gallery
Later
Gee-Bee
Last edited by GEE-BEE; 10-16-06 at 02:37 PM. Reason: spelling
10-16-06, 06:12 PM
#4
Pole Position
Thread Starter
Join Date: Aug 2005
Location: CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Lux -Mode
No not at all, start from one side when doing the double sided tape install, maybe gloves ?
email me at N77gb@msn.com and I will return your email with pic's
email me at N77gb@msn.com and I will return your email with pic's
Trending Topics
10-17-06, 12:43 AM
#10
Pole Position
Thread Starter
Join Date: Aug 2005
Location: CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Toy's
OOH YOU WANT PIC'S OF THE TOY'S
2006 KTM 300 XC-W
2006 HUSABERG FE650E ENDURO ( DESERT MACHINE )
2006 HUSABERG FS650E SUPERMOTARD
2006 DUCATI 999R XEROX
Or My 5'5 105lb Italian Sweetie
Okay maybe soon....
I will be at the next meet , you have my word....
2006 KTM 300 XC-W
2006 HUSABERG FE650E ENDURO ( DESERT MACHINE )
2006 HUSABERG FS650E SUPERMOTARD
2006 DUCATI 999R XEROX
Or My 5'5 105lb Italian Sweetie
Okay maybe soon....
I will be at the next meet , you have my word....
10-17-06, 06:51 AM
#12
Pole Position
Thread Starter
Join Date: Aug 2005
Location: CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
( Tom's )
Yes Iam trying to ironing out some thing's with them....
I will be doing front & rear bumpers, CF Hood and Iam waiting on if there price for the dual exhaust is a cat back....
I have waiting this long......
Thanx for all of your replys...
Cheers !
I will be doing front & rear bumpers, CF Hood and Iam waiting on if there price for the dual exhaust is a cat back....
I have waiting this long......
Thanx for all of your replys...
Cheers !
10-17-06, 04:03 PM
#15
OMG!..."That's hot!"
Remember, I got 1st dibs on this Lx-Mode front lip (& possibly the exhaust?) when you're ready to sell. 
Please save the box (& packing material) the LX-Mode lip comes in, thx!
Last edited by Yeah!; 10-18-06 at 02:18 AM.