HEADLIGHTs - GUESS WOT...
03-11-07, 12:14 PM
#46
Pole Position
Thread Starter
These Lights so called 'REAR FOGLIGHTS' we need to have them here in EURO Land 
Side-indicators are located at the upper left of the front fenders they have changed also since 08.2005. Im not sure if US cars have these also... The new ones are longer and thinner.
@talwang - i wonder were u dig all these secret images off!!! (my respect!)
I thought that the front-b. would already fit - now i see it in real - dosen't look to bad in my opinion... saves a lot of money too.
regards
marcus
Side-indicators are located at the upper left of the front fenders they have changed also since 08.2005. Im not sure if US cars have these also... The new ones are longer and thinner.
@talwang - i wonder were u dig all these secret images off!!! (my respect!)
I thought that the front-b. would already fit - now i see it in real - dosen't look to bad in my opinion... saves a lot of money too.
regards
marcus
Last edited by powmax; 03-11-07 at 12:32 PM.
03-11-07, 12:44 PM
#47
Its confirmed these headlights wont plug and play 
The auto level motor is a newer design with 4 wires. The old motor has 5. Other than that they bolt up, im not sure if the bumper will fit since I was discouraged once I found out they wont plug up. O well I guess ill wait till those JDM peeps mail me a conversion harness 
The auto level motor is a newer design with 4 wires. The old motor has 5. Other than that they bolt up, im not sure if the bumper will fit since I was discouraged once I found out they wont plug up. O well I guess ill wait till those JDM peeps mail me a conversion harness I don't know if they really have this conversion harness for sale or just modify the existing parts to make them work.
If they have it for sale, I'll find it sooner or later.
03-11-07, 01:32 PM
#49
Pole Position
Thread Starter
YES - It is the TTE one (130 mm oval tip). I was on BLITZ til the day before yesterday. Quality and fitting of the TTE exhaust is much ahead of the BLITZ TT/R. Sound is slightly different - a bite more agressive. But my general motor setup might be different from yours. (BLITZ SUS Intake, SARD Catalysers, TOM's Frontpipe).
regards
marcus
regards
marcus
Last edited by powmax; 03-11-07 at 02:25 PM.
03-11-07, 10:59 PM
#50
ummm very interesting to see the 06 headlights with the 02-05 bumper. doesn't seem like it's too bad at all. i wonder if that bumper was modified. i remember GEEBEE said that he had quite some gap?
i wonder what's the difference between the 4 and 5 wire setup, maybe coz' the new headlights have the adaptive function and it more signals? gamma, you are our hope
(well, not like i have the money for this mod anyway)
i wonder what's the difference between the 4 and 5 wire setup, maybe coz' the new headlights have the adaptive function and it more signals? gamma, you are our hope
(well, not like i have the money for this mod anyway)
03-24-07, 07:39 PM
#51
Driver
Join Date: May 2006
Location: TX
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Just wondering... If one has only the intentions of swapping out the 02-05 headlights w/ the 06+ headlights, what exactly needs to be changed? ONLY the headlights, not the motor function for adjusting the headlights tilt?
03-25-07, 06:47 AM
#52
Pole Position
Thread Starter
The swap itself wouldn't be the problem. But the new 'level'-motor has only four wires whereas the prefacelift connector has five. So an exact pin layout of both connectors would great to look at.
Maybe it is possible to swap the whole motor...!?
(-08.2005)
(08.2005+)
regards
marcus
Maybe it is possible to swap the whole motor...!?
(-08.2005)
(08.2005+)
regards
marcus
Last edited by powmax; 03-25-07 at 06:51 AM.
03-25-07, 09:15 AM
#53
Driver
Join Date: May 2006
Location: TX
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
So I can get a 2005 SC and buy the 06+ headlights and swap them out and there would be no more things I would have to have swapped? Like the headlights swap out just like the taillights?
04-05-07, 02:15 AM
#55
Pole Position
Thread Starter
The AFL wouldn't work for sure, but the up/down move should...
I've written several e-mails to japan, but no answer. Seems they won't share the secret with us...
regards
marcus
p.s. in the meantime i replaced/coated the interior of the roof/pillars/etc. with black alcantara - looks very nice by the way...
I've written several e-mails to japan, but no answer. Seems they won't share the secret with us...
regards
marcus
p.s. in the meantime i replaced/coated the interior of the roof/pillars/etc. with black alcantara - looks very nice by the way...
04-05-07, 11:03 AM
#57
The AFL wouldn't work for sure, but the up/down move should...
I've written several e-mails to japan, but no answer. Seems they won't share the secret with us...
regards
marcus
p.s. in the meantime i replaced/coated the interior of the roof/pillars/etc. with black alcantara - looks very nice by the way...
I've written several e-mails to japan, but no answer. Seems they won't share the secret with us...
regards
marcus
p.s. in the meantime i replaced/coated the interior of the roof/pillars/etc. with black alcantara - looks very nice by the way...
They would probably ignore you if you wrote to them in English.
04-05-07, 03:10 PM
#58
Lexus Champion
Maybe he used german LOL j/k I wish they made a conversion harness. I have these lights itting in front of my face. I have a 06 bumper going on with no headlights to match 
I guess Im going to open my old lights and black chrome them like this
I guess Im going to open my old lights and black chrome them like this
Last edited by GammaLex; 04-05-07 at 03:23 PM.