When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TW, where are you finding all these pics of the SC hooked up?
Thanks again to you and Marcus for providing some info. I will buy a set and take pics of any issues I come across.
I am about to the purchase the Behrman trunk spoiler. Andy(D-woman) came by yesterday and looking at his Tom's trunk spoiler, it seemed to hang over the tails just a bit too much for my liking.
Al, can you take the 06 Sc430 turn signal bulb and splice wires?
Hey I know this is an old thread to bring up. I’m doing the conversion right now in 2019. Lol. What did you end up doing with the turn signal not fitting in the headlight. Glue it or buy the newer socket and splice wires??? Please help. Your picture were deleted maybe cuz it was an old thread. Thanks in advance.
hello the picture looks as if the lights must tuck behind the bumper. I am guessing the Fitment is not great? Do you suggest moving forward with an 06 bumper for better Fitment? If, anyone out there have a black OEM front bumper for sale ?
thanks
JP
hello the picture looks as if the lights must tuck behind the bumper. I am guessing the Fitment is not great? Do you suggest moving forward with an 06 bumper for better Fitment? If, anyone out there have a black OEM front bumper for sale ?
thanks
JP
mines is an 02 and I bought the 06-10 front bumper And 06-10 grille then it’s a perfect fit. The 02 grille to small for the new bumper... hope this help if u need anything else I’m here
I had my 02 long ago with an 06+ bumper. I used a dremel to take off material for the corner of the headlight. It looks perfectly fine. No one could tell unless I pointed it out. You must really take your time when taking away material. I had the 06+ headlight on hand, off the car to fit it up.
mines is an 02 and I bought the 06-10 front bumper And 06-10 grille then it’s a perfect fit. The 02 grille to small for the new bumper... hope this help if u need anything else I’m here
Thanks, your message does help. I will look for an 06+ bumper and grill too?
I had my 02 long ago with an 06+ bumper. I used a dremel to take off material for the corner of the headlight. It looks perfectly fine. No one could tell unless I pointed it out. You must really take your time when taking away material. I had the 06+ headlight on hand, off the car to fit it up.
Thanks, I will be on the lookout for an 06+ bumper and grill. Are the other parts inside/behind the bumper interchangeable from an 02 to a 06+?
There should be a very old DIY thread with what you need to swap out the headlights if you search hard enough. You will need to purchase the turn signal connections for the 06+. Pop the old pins and re-insert them in the new connector. If you can find the old thread, you will find where those pins go. I had a JDM headlight which fit with no mods and a USDM headlight where i had to swap the connector FYI.
hello the picture looks as if the lights must tuck behind the bumper. I am guessing the Fitment is not great? Do you suggest moving forward with an 06 bumper for better Fitment? If, anyone out there have a black OEM front bumper for sale ?
thanks
JP