When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anybody know where I can get the vented hood that is on the red car. Or any vented hood for that matter. I want to customize my hood and I cannot find any custom hoods.
Wow! That looks fantastic! You can run a 3" duct out through the space to the side of the headlight into the area in frint of the radiator. See my post for DIY BFI I did. If you don't want to cut anything a 2" duct will fit. You can also cut a hole through the wall into the fender linrr chamber to have dual supplies into your custom airbox.
Wow! That looks fantastic! You can run a 3" duct out through the space to the side of the headlight into the area in frint of the radiator. See my post for DIY BFI I did. If you don't want to cut anything a 2" duct will fit. You can also cut a hole through the wall into the fender linrr chamber to have dual supplies into your custom airbox.
Thanks....actually I ran a piece of ShopVac hose beside the headlight and then the regular WR hose down lower and used the flange they supplied in my lower center grill. Funny thing is after we installed the headers, downpipe, and exhaust, I always had a CEL and VSC light. After cleaning all parts up and then installing the intake, no more lights....knock wood.
For those who messaged me.....which I can't respond due to our illustrious moderators, the chamber is made from 1/8” thick black plastic stock sheets I use for other part fabrication.
MrMark, looks awesome! I love my Weapon R Secret Intake. I kept the OEM airscoop to give two paths for cold air entry. Did you run the hose behind the headlight too? Mine was a tight fit and had to dremel out about an inch of the headlight firewall after removing the headlight "drape". I was able to pull the hose all the way to the filter. I ran my port and hose to the space under the front lip but your's looks very awesome into the grill mesh. Also the LED's look sweet!
PS. I also put the fancy port on after the install. My port looks much better than the last photo now.
01-01-14, 09:09 AM
... You can do it! Good luck! Post pics when finished!
