SC430 - 2nd Gen (2001-2010)

Wind Noise, Driver's Side A-Pillar...Anyone ever get it fixed?

Thread Tools
 
Search this Thread
 
Old 02-04-11, 10:09 AM
  #31  
Yes
Moderator
 
Yes's Avatar
 
Join Date: Feb 2007
Location: NM
Posts: 2,089
Received 7 Likes on 6 Posts
Default

Originally Posted by scdroptop
Having searched and read many many posts on this site over the years about wind noise coming from the a-pillar (and having the problem too over several years) my Platinum Warranty is about to expire in July and I am really going to get aggressive with my dealer about fixing this for good.

They have replaced the rubber gasket/seal going all the way around my roof at one time, they have also re-aligned the top as well as checked the latches several times.

Does anyone have a "fix" suggestion on this?

The last excuse they gave me is that "most" SC's have this problem and it is normal. They suggested it was the mirror making the noise like some of you have heard. I folded the mirror in and it still did it! They also lubed the seal by the window and it does nothing but make a mess every time you roll your window up/down.

I just don't understand how a HARDTOP with no manual latches can have wind noise at the a-pillar.

I have no leaks, this isn't coming from the passenger's side and the noise is apparent at even low speeds with no wind outside...even at 30mph+. Sounds like a damn tornado at 60mph!

Thanks!!!!
You might check the rubber seal between the pillar and the fender. The pillar is hollow and has holes in the bottom. If you have a bad seal, air can get in there and make the noise you're hearing. I had the same problem on the passenger side.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GS14AWD
GS - 4th Gen (2013-2020)
21
07-03-15 06:19 AM
CraigerL4
GS - 4th Gen (2013-2020)
7
06-10-12 07:03 AM
2thfixr
ES - 5th Gen (2007-2012)
38
01-05-07 11:11 AM
vinster29
Maintenance
8
12-10-03 03:18 PM
keeper
LX - 1st and 2nd Gen (1996-2007)
2
01-29-02 06:58 AM



Quick Reply: Wind Noise, Driver's Side A-Pillar...Anyone ever get it fixed?



All times are GMT -7. The time now is 10:44 PM.