for the rear ones
who wants to try this method? lol

 

Sprayed the front marker lights last year after Talwang showed us how easy it is (just peel back the wheel arch liner).
Wanted to do the rears for ages and Talwang came up trumps again (thanks again Talwang).

Easy as the fronts when you know how. One bolt, one clip and several screws, remove the the plastic connector between the bumper and the fender and pull the fender up and away. Thats it.

I thought that worm drive would come in useful one day. lol

Sprayed the grill body colour too while I was at it, what do you think guys?

Cheers
Steve

 

sound like every body having fun

 

Steve! Good to see your car again. I must not have the worm drive!

I never tire of looking at your SC.

Mandy

 

Looks great Steve!

 

Agree 100% Understated and elegant across the board.

 

Thanks Guys

I really appreciate your comments.

Cheers
Steve

 

Inner fender, remove 2 phillips screws on outer edge. Upper one with a regular screw driver, lower one with a shorty or offset. ( Wheel not removed )
Under rear corner of bumper, remove plastic push in rivet. I removed the 10mm screw that is holding the inner liner so I could bend it in more. The screw head faces the front of the car. I found it by finding the easy to see white plastic captured nut.
I bent the bumper cover out from the forward bottom edge and reached up to twist and remove the bayonet fitted bulb socket. Tight fit, remove jewelry and watch on the arm you are using to reach in there. There is enough wire to pull the socket out to daylight to change the bulb. Turn the light on to test new bulb and leave it on to make it easier to find the hole when reinstalling.