Removing Headlight
02-18-11, 08:17 AM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Location: texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Removing Headlight
I want to replace a bulb in my headlight, can anybody give me tips on how to do this. I would rather not break something or take things apart that I don't need to. I have an 2003 SC 430. Thanks.
02-19-11, 09:42 AM
#2
Do a search...it's been talked about many times.
If it's your high beam or low beam you can change yourself by just removing your airbox on the passengers side as well as the black trim cover (tabs) and reaching in, twisting and pulling out carefully. Driver's side requires only the removal of the top cover piece over the fuse boxes that runs along your fender. Be careful not to break the little black tabs---that's the most difficult part of the job.
If it's the 68 series parking light/driving light that's more on the side of the headlight the only way to get into it is to drop the bumper or go in through the wheel well.
If it's your high beam or low beam you can change yourself by just removing your airbox on the passengers side as well as the black trim cover (tabs) and reaching in, twisting and pulling out carefully. Driver's side requires only the removal of the top cover piece over the fuse boxes that runs along your fender. Be careful not to break the little black tabs---that's the most difficult part of the job.
If it's the 68 series parking light/driving light that's more on the side of the headlight the only way to get into it is to drop the bumper or go in through the wheel well.
Thread
Thread Starter
Forum
Replies
Last Post
