Mid-range Speaker Repair DIY (thanks Zgone)
#46
Moderator
Thread Starter
You have a point...somebody has to be the guinea pig...yeah? JK.
#47
Moderator
Thread Starter
Bump, people are asking about this repair.
#48
My midrange is d-o-n-e and I will be doing a repair this weekend. I am soooo glad that you posted this DIY Mandy, I am in awe of your greatness :-D. I am prepared beforehand, yay! Thanks!
#49
Moderator
Thread Starter
Just putting back something from the many I have taken out. You are welcome. next stop: Timing Belt. Yikes!
#51
Moderator
Thread Starter
Go to Crutchfield.com...
#52
Driver School Candidate
Join Date: Aug 2010
Location: FL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
thanks mandy, that website only has one choice for the replacement mid speakers (2-5/8") and they are $450...yikes. Any other options out there?
Last edited by MarkRN312; 08-07-11 at 06:53 PM.
#53
Moderator
Thread Starter
Get the OEM replacement from Sewell.
#54
Driver School Candidate
SC430 Door Removal Word Document
Thanks guys for the great info on Door Removal and Speaker Repair. I have taken the Liberty of putting the instructions and Photos into a word document so someone can print them out and keep them by their side while removing a door panel.
The following users liked this post:
buddhi (06-26-21)
#55
Lexus Test Driver
This is a fantastic thread! Great job Mandy!
#56
Moderator
Thread Starter
Well thanks! I need to do my rears soon (I did my sub repair years ago, I should have done the rears at the same time). When I did my SUB repair, I cleaned my seat belts!
#57
Pole Position
iTrader: (1)
So I stumbled on these speakers and I believe they are the perfect replacement speakers for the doors. They are 8ohm and 6x9, which are the perfect OEM specs. They are cheap, but compared to the OEM Mark Levinson speakers, they are worth a try. Anyone looking to replace, might give these a try and report back. Magnet looks larger than the OEM so must have some good deep bass. Anyway, I would try them but I'm mid project to make a custom set of JL Audio speakers fit into the doors. Hope someone will take the leap and report back here.
http://www.parts-express.com/tang-ba...ProductDetails
Ps... i know they are a "low name" brand, but I've found some pretty good products that I use regularly that are "no name" or "low name," in my everyday struggles.
http://www.parts-express.com/tang-ba...ProductDetails
Ps... i know they are a "low name" brand, but I've found some pretty good products that I use regularly that are "no name" or "low name," in my everyday struggles.
#58
Racer
iTrader: (1)
So I stumbled on these speakers and I believe they are the perfect replacement speakers for the doors. They are 8ohm and 6x9, which are the perfect OEM specs. They are cheap, but compared to the OEM Mark Levinson speakers, they are worth a try. Anyone looking to replace, might give these a try and report back. Magnet looks larger than the OEM so must have some good deep bass. Anyway, I would try them but I'm mid project to make a custom set of JL Audio speakers fit into the doors. Hope someone will take the leap and report back here.
http://www.parts-express.com/tang-ba...ProductDetails
Ps... i know they are a "low name" brand, but I've found some pretty good products that I use regularly that are "no name" or "low name," in my everyday struggles.
http://www.parts-express.com/tang-ba...ProductDetails
Ps... i know they are a "low name" brand, but I've found some pretty good products that I use regularly that are "no name" or "low name," in my everyday struggles.
#60
Moderator
Thread Starter
I replaced my ovals (door) to the 6.5's Rockfords, too. I forgot if I actually did a DIY on it, I think I did.