NavTool/Backup camera - Install - Pls Contribute
#1
Driver
Thread Starter
Join Date: Jan 2011
Location: Va
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have my Navtool and the camera in hand and I am ready to do the install tomorrow, but I need a little help. Aside from some pretty basic stuff on my old cars, I have not done much with wiring, and I would consider myself more than a novice. So I have searched the forum and gathered some info from PearlPower and VVIiBob among others. I hope that this will be as easy for a beginner and as "plug and play" as it is advertised but I am not going to fool myself into thinking that I won't have issues, especially since this is my first mod on the SC and well, I don't want to break stuff
.
I am installing just a backup camera for now. No DVD or other video input so I won't be dealing with or using the cut rate toggle switch.
I still have a few questions:
- Does anyone have the pictures or PDF instructions from PearlPowers original thread?
- Are there any tools or extra supplies that I should have before I start? (soldering iron? Extra wiring?)
As a huge thank you for any help, past and present that I have received from this forum (and assuming my insall goes well) I will work up step by step "Backup/Navtool for dummies" install instructions with pictures so more people can DIY. We will know once and for all how simple it is to install the Navtool
.
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
I am installing just a backup camera for now. No DVD or other video input so I won't be dealing with or using the cut rate toggle switch.
I still have a few questions:
- Does anyone have the pictures or PDF instructions from PearlPowers original thread?
- Are there any tools or extra supplies that I should have before I start? (soldering iron? Extra wiring?)
As a huge thank you for any help, past and present that I have received from this forum (and assuming my insall goes well) I will work up step by step "Backup/Navtool for dummies" install instructions with pictures so more people can DIY. We will know once and for all how simple it is to install the Navtool
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
#3
Driver
Thread Starter
Join Date: Jan 2011
Location: Va
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
#4
Instructor
iTrader: (1)
Join Date: Mar 2009
Location: Formerly Easton, Pa. Bradenton FL, now Osprey Fl.
Posts: 877
Likes: 0
Received 6 Likes
on
6 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Good luck to both of you!!!! Please take lots of pictures. Too bad Virginia and Texas are so far apart. Maybe if things get hairy you could skype or something to each other, so it would be like you were working side by side. Something to think about.
Trending Topics
#9
Lexus Test Driver
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Maybe someone can tell me if I installed it wrong. I plugged in the plug and play harness of course.
I then tapped the navtool 12v power to the Gray accessory wire on the 18 pin plug on the back of the nav unit. I then tapped the ground in to the white with black stripe on 18 pin plug. I also tapped the 12v for the camera and ground to this as well.
I then tapped the Blue camera wire from navtool in to the yellow with red stripe on back on the 18pin plug of navunit.
I took the two white and green handbrake wire and grounded them all to a bolt.
RCA is plugged in to input 2.
Nav seems to come up fine but camera doesnt turn on when I go in reverse. I even tried plugging the RCA in to input 1, flipped the toggle an it changes to a blank black screen.
I know I'm getting power to navtool because the red light is on.
Anyone know what I'm doing wrong??
I then tapped the navtool 12v power to the Gray accessory wire on the 18 pin plug on the back of the nav unit. I then tapped the ground in to the white with black stripe on 18 pin plug. I also tapped the 12v for the camera and ground to this as well.
I then tapped the Blue camera wire from navtool in to the yellow with red stripe on back on the 18pin plug of navunit.
I took the two white and green handbrake wire and grounded them all to a bolt.
RCA is plugged in to input 2.
Nav seems to come up fine but camera doesnt turn on when I go in reverse. I even tried plugging the RCA in to input 1, flipped the toggle an it changes to a blank black screen.
I know I'm getting power to navtool because the red light is on.
Anyone know what I'm doing wrong??
#10
Driver
Thread Starter
Join Date: Jan 2011
Location: Va
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I had a bunch of stuff get in the way yesterday so I had to move my me+car time to today. I will check in along the way and let you know if I have the same issue or if I find anything.
#11
Moderator
![](https://www.clublexus.com/forums/images/ranks/rank-mod2.gif)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Do you have a Volt/ohm meter for testing? Have you been able to test the camera to see if works properly with an independent 12v source and monitor? If not, do that first, then you should power up the camera to the back up lights, so when put the car into reverse, the camera is powered up. I've added a PDF with the wire paths.
Last edited by VVTiBob; 03-13-11 at 08:20 AM. Reason: Added PDF and question
#12
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
VIPNiSS, did you take pics? Hope you did. Still not working? Are we doing the LED tail upgrade together?
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Maybe someone can tell me if I installed it wrong. I plugged in the plug and play harness of course.
I then tapped the navtool 12v power to the Gray accessory wire on the 18 pin plug on the back of the nav unit. I then tapped the ground in to the white with black stripe on 18 pin plug. I also tapped the 12v for the camera and ground to this as well.
I then tapped the Blue camera wire from navtool in to the yellow with red stripe on back on the 18pin plug of navunit.
I took the two white and green handbrake wire and grounded them all to a bolt.
RCA is plugged in to input 2.
Nav seems to come up fine but camera doesnt turn on when I go in reverse. I even tried plugging the RCA in to input 1, flipped the toggle an it changes to a blank black screen.
I know I'm getting power to navtool because the red light is on.
Anyone know what I'm doing wrong??
I then tapped the navtool 12v power to the Gray accessory wire on the 18 pin plug on the back of the nav unit. I then tapped the ground in to the white with black stripe on 18 pin plug. I also tapped the 12v for the camera and ground to this as well.
I then tapped the Blue camera wire from navtool in to the yellow with red stripe on back on the 18pin plug of navunit.
I took the two white and green handbrake wire and grounded them all to a bolt.
RCA is plugged in to input 2.
Nav seems to come up fine but camera doesnt turn on when I go in reverse. I even tried plugging the RCA in to input 1, flipped the toggle an it changes to a blank black screen.
I know I'm getting power to navtool because the red light is on.
Anyone know what I'm doing wrong??
Oh, be sure that all the Navtool and Nav computer connectors are fully clicked into their sockets.
#15
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
It sounds like you've got it all right - but the quick taps. They sometimes fail immediately but they also fail later on. It's such a pain to get to the nav computer I'd recommend not using the quick taps. It may be that the gauge of the reverse wire is too small for the quick tap to work at all. I hope it turns out to be an easy fix for you.