SC430 hard to reach parking light bulb
#18
Lead Lap
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Try this ShawnOk. Take a thin semi flexible wire and wrap a bit of blue painters tape so you have most of the sticky end on the outside. If the wire is thin and flexible, you can coil the end on the tape. Imagine how a frog's tongue works. I've had success on a number of occasions with this method. Good luck!
Lol this happened to me also. I took one of those wire hangers and shaped it like a hook.. after 30 min of poking around i got it out lol man it was annoying.
Shawn - im not sure wat kind of bulb you dropped but mine was those small T ones with square top (9 smd).. anyhow, keep trying itll come out eventually. goodluck
Last edited by 416tt; 08-04-14 at 12:09 AM.
#19
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
So I will try again today but after about two hours using a metal hanger, and even trying a high suction vacuum at the local car wash, no luck. Went to Lexus to gauge the damage, having it removed would cause. Lexus quoted $138, local shop quoted $50-$75. What do you think? Or should I go for it myself? Can anyone supply directions for the bumper drop and headlight removal please (just in case)?
#20
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![CircleL](https://www.clublexus.com/forums/images/smilies/498pxlexusdivisionemble.png)
![Agreed](https://www.clublexus.com/forums/images/smilies/boink.gif)
#21
Instructor
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Egads!](https://www.clublexus.com/forums/images/smilies/pat.gif)
That has got to be the answer DarthSid.
I tried with double sided tape, but that almost got stuck inside the light so gave up and took the bumper off.
Cheers
Steve
#22
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
GOT IT OUT!!! HOORAY!!! So after buying a $13 1 1/8 inch washer drain pipe, I went to the local car wash (Fuller's) that has super powerful (FREE) vacuums, and after rigging the two hoses to connect, and about 3 bloody knuckles, I was able to fish it out after about 20 minutes! Unfortunately, the bulb broke but can't argue with the WIN for the day. Thanks for all the advice guys! It was incredibly valuable!
#24
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Haha thanks, Darth but I'll be saving money for more mods! On an unrelated note, I would still like directions on dropping the bumper, please. I'm interested in redoing my side-shine LED's to sit further back below the headlight housing. Thanks in advance to anyone who can help.
#25
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
ShawnOk have you tried this thread?
Good luck!
https://www.clublexus.com/forums/sc-...eplacment.html
Good luck!
https://www.clublexus.com/forums/sc-...eplacment.html
#26
Lead Lap
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Haha Awesome!, great idea Sid, and good work Shawn!
lol im looking to change mine again soon to a more warm white rather then the cool white and also with the new COB led's.. anyone try those?
I actually got a full set of cob headlights for another car at home.. man they are crazy bright, and way better then HID kits.. im planning to get my hands on ones for the sc's fogs and replace the DRL's from smd to cob.. anyone else try the highpower cobs yet?
lol im looking to change mine again soon to a more warm white rather then the cool white and also with the new COB led's.. anyone try those?
I actually got a full set of cob headlights for another car at home.. man they are crazy bright, and way better then HID kits.. im planning to get my hands on ones for the sc's fogs and replace the DRL's from smd to cob.. anyone else try the highpower cobs yet?
#27
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
It's funny how I read most of us spend our time trying to fit our big hand through some little holes just to change light bulb to only get it all bloody or scratched up. Also, it pisses most of us off. From my experience digging your hand through the car and trying to find the light bulb you will end up spending the same amount of time taking the front bumper off and you won't be pissed off. Front bumper is not hard to take off believe me. I think taking the radio out is harder than front bumper. Just my opinion and my experience.
#28
Lead Lap
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
its retarded how complicated changing a bulb is in this car.. Specially the fogs.. those pins in the fog are just garbage. The most retarded one was for the mercedes glk.. the headlight bulb .. very poorly designed, it took me 1 hr to get the bloody pin its place to hold the bulb, and it kept falling out of its place as I would try to clip it in from opposite end.. fog light is whatever but headlight and being that complicated? im just wondering if they were thinking about what people would do if they were out far and a bulb went out.
![Egads!](https://www.clublexus.com/forums/images/smilies/pat.gif)
#29
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
its retarded how complicated changing a bulb is in this car.. Specially the fogs.. those pins in the fog are just garbage. The most retarded one was for the mercedes glk.. the headlight bulb .. very poorly designed, it took me 1 hr to get the bloody pin its place to hold the bulb, and it kept falling out of its place as I would try to clip it in from opposite end.. fog light is whatever but headlight and being that complicated? im just wondering if they were thinking about what people would do if they were out far and a bulb went out. ![Egads!](https://www.clublexus.com/forums/images/smilies/pat.gif)
![Egads!](https://www.clublexus.com/forums/images/smilies/pat.gif)
#30
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I got the 168 led from ebay (x10 incase any go bad)....took off my wheel, and pulled the fender lining out... you gotta just sneak your hand in and you will feel the long plastic socket, just turn and pull out.. putting back in isnt hard as you can poke it back inside and look from outside of the headlight if your close or not
here are the pics:
Attachment 299932
Attachment 299933
Attachment 299934
Attachment 299935
Attachment 299936
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
here are the pics:
Attachment 299932
Attachment 299933
Attachment 299934
Attachment 299935
Attachment 299936
Thread
Thread Starter
Forum
Replies
Last Post