Tried to mod the sc430 headlights like someone on here.
#1
Driver
Thread Starter
Tried to mod the sc430 headlights like someone on here.
Hi I tried to mod my headlights similar to someone else's headlight on here. Please let me know what you think. I did the color of the shroud pearl white to match my car. Should I just do all black? I was thinking about red shroud?
#2
Driver
Thread Starter
ok I decided to do away with the pearl white shroud cuz friend said the pearl white doesn't match my car it's to dark. I think I sprayed it to much or something. So i decided to go with chrome since my grill is chrome and black. Please let me know what you guys think and give me some suggestions or feedback.
#7
Driver
Thread Starter
na only bought the shroud and lens n purchased bright white led for daytime light , basically i will lose out on the highbeam. So im doing it more for looks. i havent tested anything out but hoping to get everything done by next week.
Trending Topics
#11
Driver
Thread Starter
Here's housing in pearl white. I didn't want to do all pearl white becus it would to much of all one color however i think it might look good or I could be wrong. Let me know what you guys think before I finalize my options. Also the shroud might look crooked it's because I didn't tighten it down yet.
Last edited by pvong713; 01-05-14 at 03:42 PM.
#15
Pole Position
iTrader: (1)
I had requested directions on how this mod was done and haven't had any response yet.. hoping someone will chime in. The reason I'm asking is that I'm wondering if there is anyway to add an LED's strip to the housing (between the clear lens and plastic cowl/shroud) rather than an exterior/exposed part of the bumper. Any suggestions or hints?
UPDATE: My plan is to do this mod.... http://store.ijdmtoy.com/Audi-Style-...ule-5e.htm#top so any help on opening the clear lens to secure it between the shroud and lens is really appreciated.
UPDATE: My plan is to do this mod.... http://store.ijdmtoy.com/Audi-Style-...ule-5e.htm#top so any help on opening the clear lens to secure it between the shroud and lens is really appreciated.
Last edited by ShawnOk; 01-30-14 at 09:04 PM.