Caflashbob

My 08 has bubbles in the display. Any fixes

Coleroad

thats from the anti glare coating. Mine did it on the radio. I used plastX and removed the coating. I still had no problems reading it in the direct sunlight. On any of the screens , cleaners will mess up the coating. I think bgw70 has the best idea not to have problems. Using the eyeglass cleaning wipes. They are very gentle.

Retroplay

I am actually busy preparing to move to Florida in a week.

I've gotten one unit from a member here that has missing digits and I checked out the solder connections and there was nothing wrong with them. I also tried reflowing the LCD controller IC and that didn't help either. That convinced me that the most likely cause is that the LCD segments have simply wore out. There is some more things I could test and/or try, but all projects have been on hold since January. I will hopefully be back at things when I get the new workshop set up down there.

What might be beneficial is to scan the layout of the LCD and look into a group buy to a Chinese custom LCD manufacturer. I'd personally love to see a reverse LCD version (black background with red or white digits).

Edit: Doh! Replied to the wrong post!

Retroplay

I removed the lens from one of mine and just replaced it with a custom piece of anti-reflective plexi (they make it for picture frames). On the other, I did what Coleroad said and stripped off the coating.

Harold57

How would you compare the two methods?

bobster99

Tired of the whole cold weather thing huh... It is70 degrees and sunny here in Miami... I would gloat but I know that August is coming.
Thanks for the response and if you want another one to try to fix just let me know.
Bob