06 SC 430 O2 Sensor wire colors
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2011
Location: FL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Trying to determine the O2 Wire colors coming from the ECU to bank1 sensor1 for 06 Lexus SC430.
They were stripped from the connector and I would like to solder them to the O2 sensor.
My research on the forum has not come up with anything so far.
Any assistance on the matter would greatly be appreciated.
They were stripped from the connector and I would like to solder them to the O2 sensor.
My research on the forum has not come up with anything so far.
Any assistance on the matter would greatly be appreciated.
#2
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I am not sure if this will help you, but these are the instructions that came with a Bosch Universal O2 sensor. http://taligentx.com/passat/info/sch...stallation.pdf
According to the Chart the Blue Wire is the Data Wire. The black Wires are the heater wires and the white Wire is the ground wire
According to the Chart the Blue Wire is the Data Wire. The black Wires are the heater wires and the white Wire is the ground wire
#4
Lexus Test Driver
#5
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I gave you the colors from the other side of the chart.
Still, I could be way off. To second what BGW asked, what color wires do you have?
Thread
Thread Starter
Forum
Replies
Last Post
LexBrett
SC430 - 2nd Gen (2001-2010)
2
08-31-15 05:23 PM