SC430 Shadow Lights (door lights)
02-05-19, 09:01 AM
#16
Hello all.......I purchased these from Amazon in Oct 2018...they were plug and play with no modification required...I did have a problem with one of the lights projecting inward too much and cutting off the top of the image...being that one was perfect I contacted the company suggesting the lens was offset...they sent me a new set and the problem was resolved.......Here's what I have:
OXILAM Car Door LED Logo for Lexus Projector Ghost Shadow RX/ES/GX/LS/LX/is, Entry Welcome Lamp Logo Light, LED Courtesy Step Lights Ground Lamp Kit Replacement (2 Pack)
by
03-05-19, 06:01 PM
#17
Driver School Candidate
Hello all.......I purchased these from Amazon in Oct 2018...they were plug and play with no modification required...I did have a problem with one of the lights projecting inward too much and cutting off the top of the image...being that one was perfect I contacted the company suggesting the lens was offset...they sent me a new set and the problem was resolved.......Here's what I have:
OXILAM Car Door LED Logo for Lexus Projector Ghost Shadow RX/ES/GX/LS/LX/is, Entry Welcome Lamp Logo Light, LED Courtesy Step Lights Ground Lamp Kit Replacement (2 Pack)
by OXILAM
03-06-19, 12:54 AM
#18
Driver
Hello all.......I purchased these from Amazon in Oct 2018...they were plug and play with no modification required...I did have a problem with one of the lights projecting inward too much and cutting off the top of the image...being that one was perfect I contacted the company suggesting the lens was offset...they sent me a new set and the problem was resolved.......Here's what I have:
OXILAM Car Door LED Logo for Lexus Projector Ghost Shadow RX/ES/GX/LS/LX/is, Entry Welcome Lamp Logo Light, LED Courtesy Step Lights Ground Lamp Kit Replacement (2 Pack)
by OXILAMI now have several pairs of these heading to Australia. The ones I bought here did not fit correctly or project correctly.
Nathan
03-06-19, 05:25 AM
#19
Pole Position
In my case, on the SC, this was way back I 2012, I had to install the projector type, meant I needed to put a hole and installed the projector and the Lexus Logo is twice as big. Nowadays, they have the whole unit as plug and play and my other 2 Lexus cars have them, however some modification required to eliminate the logo being cut off. I have another set of the old fashioned way projectors, if anybody is interested.
03-06-19, 08:53 AM
#20
Easily. There is a rubber drain plug in the bottom. I cut it out and dropped my projector light, tapped into my park light.
It has a 15 second delay, then it switches off. It is not all the time, at least the ones I got. This was a long time ago. But people who see it like it.
It has a 15 second delay, then it switches off. It is not all the time, at least the ones I got. This was a long time ago. But people who see it like it.
03-06-19, 04:38 PM
#21
Driver
I bought some the same as the thread starter and they are a rubbish fit , i will have to rework the casing or modify the light so it stays in the door casing hole , there is no springs to hold it in like on the original lights.
08-20-19, 03:28 PM
#23
Driver
Despite assurances from others here, my Oxilam lights also did not fit my door cards as "plug and play". Looks like I will have to adjust the door cards to get a flush fit.
08-21-19, 05:44 AM
#24
You can now buy a plug and play replacement for the puddle light with the Lexus Emblem now on Doors, unplug old and plug in the new, however the brand you are talking about, i can not comment on. Back then we did not have those so I did it the old way, boring a hole and dropping the projector light.
For the REAR Puddle light, you will have to bore a hole and simply drop the projector light. I tapped into the park light and done, same process I did for the doors.
The rest of my Lexus, it is plug and play.
For the REAR Puddle light, you will have to bore a hole and simply drop the projector light. I tapped into the park light and done, same process I did for the doors.
The rest of my Lexus, it is plug and play.
05-24-20, 08:25 AM
#25
Driver School Candidate
You can now buy a plug and play replacement for the puddle light with the Lexus Emblem now on Doors, unplug old and plug in the new, however the brand you are talking about, i can not comment on. Back then we did not have those so I did it the old way, boring a hole and dropping the projector light.
For the REAR Puddle light, you will have to bore a hole and simply drop the projector light. I tapped into the park light and done, same process I did for the doors.
The rest of my Lexus, it is plug and play.
For the REAR Puddle light, you will have to bore a hole and simply drop the projector light. I tapped into the park light and done, same process I did for the doors.
The rest of my Lexus, it is plug and play.
05-25-20, 09:01 AM
#26
Go look in Amazon, read reviews. Good luck as I said it is plug and play.
The following users liked this post:
sc4tlc (05-27-20)
05-27-20, 06:46 AM
#29
Driver School Candidate
Mine are these from this video, check out his link. Work like a champ with full logo and no cut offs.
https://youtu.be/kuPkBgfGilE
Ian B
https://youtu.be/kuPkBgfGilE
Ian B
Thread
Thread Starter
Forum
Replies
Last Post