triggaice

Its called a converter ladies and gentlemen, get a decent brand and make sure u have that remote wire hooked up right and ur done. I got a converter if any of u guys need one

LexPro

Or you could use the Speaker level inputs on your amp if it has them.

RodF

In my case, I got an amp that accepted a speaker level input.

Phu

Thanks for all the response guys. Just two more questions: 1) when using either a converter or speaker input did you guys tap into the subwoofer speaker wires or the rear left and right speaker wires? 2) Where did you guys run your remote wire, into the power lead of the antenna?

RodF

Tapped into the subwoofer speaker wire. You may need to equalize the amp to get the right frequency of lows from the back so that the door speakers can take care of the high bass. If the higher bass frequencies come out louder from the back, it didn't sound as good.

I'm not sure where they tapped in for the power.

Phu

Anyone know how to get to the factory sub?

LexPro

Take out the back seat and if using a JL audio amp you do not need a turn on lead. They have an input sensing turn on.