TPMS: Favorite Subject - Can't disable it
#16
Pole Position
Thread Starter
#17
Lexus Test Driver
#18
Pole Position
Has anyone ever tried to set the threshold of lower limit to -1 after taking the sensors out?
I wonder if that would shut off the light.
But on second thought, if the ecu isn't reading any pressure sensors, it wouldn't read any pressure.
I wonder if that would shut off the light.
But on second thought, if the ecu isn't reading any pressure sensors, it wouldn't read any pressure.
#19
Pole Position
Thread Starter
The warning light is still off. I hooked up Techstream last night and it showed three out of four sensor are not communicating with the ECU. The voltages are good though. What I don't understand is the warning light was ON until the battery was discharged/recharged and now the warning light is off? VitiBob, can you explain? Wonder when the light turns on again?
So, guys, you CAN disable the warning light if you have dead sensors. As you can see from the Techstream table, I have three dead sensors (notice the temp in the dead sensors) and don't have warning light.
#21
Pole Position
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post