When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a plenty of old server rack rail (IT stuff ) so I just cut 2 pieces and drill couple holes to match the original. I just double it up, using the old bracket and the new piece together.
Installation was a piece of cake, 2 bolts on each side and done in no time.
I also did this to the rear lower control arms. You will need 2 pieces for each side, total of 4.
ll the aftermarket RLCA welded them together.
I have a plenty of old server rack rail (IT stuff ) so I just cut 2 pieces and drill couple holes to match the original. I just double it up, using the old bracket and the new piece together.
Installation was a piece of cake, 2 bolts on each side and done in no time.
I also did this to the rear lower control arms. You will need 2 pieces for each side, total of 4.
ll the aftermarket RLCA welded them together.
I finally got around to installing the Ultra Racing braces. They just barely fit, 1 of them is slightly touching the rubber on the exhaust hanger, but it shouldn't matter. They're VERY beefy, very nice quality.
I'd love to tell you its worth $125, but truthfully, I can't really tell the difference. In fairness, I have a ton of suspension mods now, so there really wasn't much flex left. I think digitatc had the right idea, beef up the brace at a low cost.
Rear under chassis brace
Rear strut tower brace.
Radiator cooling plate (stainless steel) (clone of Carbing Radiator Cooling Plate Aluminum )
He's making the front lower chassis brace (like the Cusco/Toms/TRD) but that won't be available until summer.
Rear under chassis brace
Rear strut tower brace.
Radiator cooling plate (stainless steel) (clone of Carbing Radiator Cooling Plate Aluminum )
He's making the front lower chassis brace (like the Cusco/Toms/TRD) but that won't be available until summer.
paypal with protection
yes that is 6500Rub or ~80bucks but the shipping is the one that costs more.
Please post once you get/install them. I'm super-interested in that rear, lower brace.
Is there a good trick to get the site to translate? Google chrome is only getting about half of it into english, when I go to the "cart" I can't make out what any of it is.
use Google translate app on your phone and point the camera at that location where the browser can't translate.
The guy only make them when someone orders. I place my order on April 25th and he just shipped on May 17th.
You pay once he got them ready to ship, just don't back out at the end. I don't think they are making much on this....
But you should just wait until after I installed it.
Unless you got no patience.
use Google translate app on your phone and point the camera at that location where the browser can't translate.
The guy only make them when someone orders. I place my order on April 25th and he just shipped on May 17th.
You pay once he got them ready to ship, just don't back out at the end. I don't think they are making much on this....
But you should just wait until after I installed it.
Unless you got no patience.
I have a set on my bench ready to go in once I get time. They're a little heavier than I expected.
Was going to wait until I test them out before recommending them.
use Google translate app on your phone and point the camera at that location where the browser can't translate.
The guy only make them when someone orders. I place my order on April 25th and he just shipped on May 17th.
You pay once he got them ready to ship, just don't back out at the end. I don't think they are making much on this....
But you should just wait until after I installed it.
Unless you got no patience.
I have a set on my bench ready to go in once I get time. They're a little heavier than I expected.
Was going to wait until I test them out before recommending them.
10-23-20, 01:33 PM
) so I just cut 2 pieces and drill couple holes to match the original. I just double it up, using the old bracket and the new piece together.
