Convertible not working
#31
Pole Position
#32
Ok I feel stupid and so relieved at the same time lol. I tripled check all the I did cleaning and applying grease I noticed the little yellow cap for lithium grease stuck in the gears. I removed it and everything works again. Thanks for the suggestions
saved me a trip to the Lexus dealership $$$
saved me a trip to the Lexus dealership $$$
#33
Hi guys!
I finally fixed my top problem. I went to the dealership and the advisor was nice enough to scan it for free. He even printed it out the procedure to check and fix it. I don't have the code here since I left it at the office. It basically said I have to check the continuity on some wires and voltage reading between the metal top ECM and the passenger door module and the passenger seat module. If they are all good then must replace the top ECM. I bought a used top ECM on Ebay for $60 and swapped it out. It worked instantly. It took my 30 minutes to swap it. Now my top is working perfectly. I didn't have to do anything with the power window auto Up/Down setting. I was so ecstatic! Went for a half hour drive with the top down and the music on. It was PURE satisfaction and joy! I then cleaned, conditioned all the rubbers and lubed all the joints. Thank you all who had been responding to my post and tried to help out.
I finally fixed my top problem. I went to the dealership and the advisor was nice enough to scan it for free. He even printed it out the procedure to check and fix it. I don't have the code here since I left it at the office. It basically said I have to check the continuity on some wires and voltage reading between the metal top ECM and the passenger door module and the passenger seat module. If they are all good then must replace the top ECM. I bought a used top ECM on Ebay for $60 and swapped it out. It worked instantly. It took my 30 minutes to swap it. Now my top is working perfectly. I didn't have to do anything with the power window auto Up/Down setting. I was so ecstatic! Went for a half hour drive with the top down and the music on. It was PURE satisfaction and joy! I then cleaned, conditioned all the rubbers and lubed all the joints. Thank you all who had been responding to my post and tried to help out.
Last edited by Tnguyen010; 05-16-23 at 06:15 PM.
The following 2 users liked this post by Tnguyen010:
Bgw70 (05-17-23),
DshngDaryl (05-17-23)
#34
Lexus Test Driver
Hi guys!
I finally fixed my top problem. I went to the dealership and the advisor was nice enough to scan it for free. He even printed it out the procedure to check and fix it. I don't have the code here since I left it at the office. It basically said I have to check the continuity on some wires and voltage reading between the metal top ECM and the passenger door module and the passenger seat module. If they are all good then must replace the top ECM. I bought a used top ECM on Ebay for $60 and swapped it out. It worked instantly. It took my 30 minutes to swap it. Now my top is working perfectly. I didn't have to do anything with the power window auto Up/Down setting. I was so ecstatic! Went for a half hour drive with the top down and the music on. It was PURE satisfaction and joy! I then cleaned, conditioned all the rubbers and lubed all the joints. Thank you all who had been responding to my post and tried to help out.
I finally fixed my top problem. I went to the dealership and the advisor was nice enough to scan it for free. He even printed it out the procedure to check and fix it. I don't have the code here since I left it at the office. It basically said I have to check the continuity on some wires and voltage reading between the metal top ECM and the passenger door module and the passenger seat module. If they are all good then must replace the top ECM. I bought a used top ECM on Ebay for $60 and swapped it out. It worked instantly. It took my 30 minutes to swap it. Now my top is working perfectly. I didn't have to do anything with the power window auto Up/Down setting. I was so ecstatic! Went for a half hour drive with the top down and the music on. It was PURE satisfaction and joy! I then cleaned, conditioned all the rubbers and lubed all the joints. Thank you all who had been responding to my post and tried to help out.
so glad it is working again
#35
The code is B1273, Metaltop ECU communication stop. I first checked the fuse 7.5A MPX-B1 in the Passenger Side J/B (#17), as shown on page 2. I didn't think there's anything wrong with the harness so I decided to swap the ECU first. Plus, to check the continuity and ground voltage on the harness, you have to open up the door panel, and get under the passenger seat. It's easier to just open up the floor cover in the trunk and swap the ECU. That whole thing took me 30 minutes. The subsequent pictures tell you what to do for the whole test.
I hope this will be helpful to someone in the future. Happy cruising, everyone!
I hope this will be helpful to someone in the future. Happy cruising, everyone!
Thread
Thread Starter
Forum
Replies
Last Post
Caitycat
LS - 1st and 2nd Gen (1990-2000)
5
05-24-16 03:10 PM