Customizing the panoramic view monitor
#46
So what you want to do is hold the menu button down and simultaneously flip your lights on and off rapidly 5 or 6 times and it'll access a service menu. From there you'll go to camera setting and the next menus you'll utilize the menu button instead of cursor to toggle through options and you can select your color from there. You're welcome
#47
1. Turn car on
2. Hold down the menu button
3. Quickly flip headlights between off and auto for 5-6 times
4. Go to Function Check/Setting
5. Go to Camera Setting
6. Go to Body Color Setting
7. Use MENU button to change options
For the doubters:
2. Hold down the menu button
3. Quickly flip headlights between off and auto for 5-6 times
4. Go to Function Check/Setting
5. Go to Camera Setting
6. Go to Body Color Setting
7. Use MENU button to change options
For the doubters:
The following users liked this post:
mspearl95 (10-11-17)
#48
awesome thanks man! dealer didn't even know this could be done.
#52
#53
Thanks. I think i tried that, but will try again. Do you have the engine running, engine off but in "run", or in accessory mode? Also, how fast are you switching it on and off? I tried about a second and a half between on and off, to as fast as i could switch and none worked.
#54
Thanks. I think i tried that, but will try again. Do you have the engine running, engine off but in "run", or in accessory mode? Also, how fast are you switching it on and off? I tried about a second and a half between on and off, to as fast as i could switch and none worked.
The following users liked this post:
Exec8468 (10-16-17)
#55
[QUOTE=ericsan13;10003957]1. Turn car on
2. Hold down the menu button
3. Quickly flip headlights between off and auto for 5-6 times
4. Go to Function Check/Setting
5. Go to Camera Setting
6. Go to Body Color Setting
7. Use MENU button to change options
Very clear instructions, easy peasy, thank you!!
2. Hold down the menu button
3. Quickly flip headlights between off and auto for 5-6 times
4. Go to Function Check/Setting
5. Go to Camera Setting
6. Go to Body Color Setting
7. Use MENU button to change options
Very clear instructions, easy peasy, thank you!!
#57
#58
I got it finally! Thanks!! Not 100% sure but I think having the wipers set to "auto" and the fog lights on may have been the problem. Anyone else venture into the other settings yet? Im especially curious about "Vehicle Signal" but too scared to open it. Lol! Sequential turn signals?? Maybe enform remote start from fob enabling? Or...maybe nothing. Haha!
Last edited by Exec8468; 10-16-17 at 08:26 PM.
#59
I got it finally! Thanks!! Not 100% sure but I think having the wipers set to "auto" and the fog lights on may have been the problem. Anyone else venture into the other settings yet? Im especially curious about "Vehicle Signal" but too scared to open it. Lol! Sequential turn signals?? Maybe enform remote start from fob enabling? Or...maybe nothing. Haha!
#60
I just tried them and looks like theyre all for diagnostics/troubleshooting. Like Nail34 said, its all in technical wording...I didnt see your post until now. Vehicle signal is just diagnostics...i think it had "ignition = on" "back up = off"...useless stuff like that. Lol!
The following users liked this post:
GSFRX350 (10-17-17)