When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got a little booboo af work. I was surprised to see how big the dent was when it was a little tap.
I used a cheap Harbor Freight heat gun and pushed it out. Then some touchup paint and some clear coat.
The wife said it looks really so I took that as a a good job LOL.
Got a little booboo af work. I was surprised to see how big the dent was when it was a little tap.
I used a cheap Harbor Freight heat gun and pushed it out. Then some touchup paint and some clear coat.
The wife said it looks really so I took that as a a good job LOL.
Really nice guy at Costco. I took them in without the caps on TPMS sensors. He said...here are some extra Lexus caps if you don't want to keep the green ones on there.
I know... pic was literally taken after I rolled the tires out of their service bay into my trailer. Costco only does nitrogen fill IIRC and always puts the green caps on. Not a bad quality cap though as it does have a nice rubber gasket up in there. I left off the stock caps before taking tires in since I didn't want to risk tech losing them. I plan to put the stock ones back on.
Thanks. I was surprised how easy it was to push it out with very little force after a few seconds with the heat gun. I'm still perplex to see how that section was pushed since it wasn't at a corner.
Tested my braking system the other day. Not paying attention I got off 1 exit too soon, running 62mph when I came over a hill to stopped traffic. Thought I was getting on 19/400 but it was a side street exit. I live up 400 so stupid mistake. All the noise is my work equipment flying forward from the rear. The braking feature really seems to work in the GX, I just feel like I have no brake pressure control when it kicks in. Braking goes from “OK I got this” to the GX going into full panic mode. I guess better safe than sorry.
You hear my phone ring right when this happened (piano riff). I did answer it and it was a Real estate agent solicitation. Don’t think I’ll ever be hearing from him again
Threw on the Michelin X-Ice XI2s and associated the TPMS sensors on the winter rims. Worked exactly as it should with TS and sensors showed up right away in data list. Best to keep notepad open on computer and copy and paste the codes in.
I hear.... I was a little doubtful it would work first time but no issues at all. You have 5 minutes to enter the codes. If this elapses you just start over.
Let us know how that goes. Curious how easy the coil packs release.
Thanks!
Of course... I just hope there isn't signs of oil intrusion from failing seals. All the coils I've ever done have just popped right out with only a minimal amount of force.