Aggressive fitment IS-F pics!
#1009
Lexus Champion
iTrader: (9)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^^^^You didn't mention offsets. But, your choice of sizes makes the fronts .2" smaller in front and .6" larger in OD than stock. I am running stock RCF wheels (9" and 10") offsets +50mm and +41mm. Rear fenders rolled flat. Running 255/35/19 and 295/30/19 (same OD as stock). stock height.
Lou
Lou
#1010
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](https://cimg1.ibsrv.net/gimg/www.clublexus.com-vbulletin/1080x1080/img_20170810_202648_573_29e14eb898d300096dbb30764cdfe755fc96f0c2.jpg)
![](https://cimg4.ibsrv.net/gimg/www.clublexus.com-vbulletin/1080x1080/img_20170810_202648_575_b9bec53f70025f7b1c23730da077f565cd565027.jpg)
19x9 (front) 19x10.5 (rear)
245/35 275/35
Was trying to fit 255s up front and 295s in the back, but it just wasn't going to happen.
Coilovers are next.
Not possible without using some camber. My set up is without camber adjustment and it is pretty max as you can with shaved fenders.
The following 4 users liked this post by Nickophett:
#1012
Racer
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^ Specs please...love those wheels
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
The following users liked this post:
L350XIS (08-04-22)
#1017
#1019
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Looking to order some VS Forged wheels soon. Want to do a 19x 9.5 +38 and 10.5 +42 with eventually 255/35’s and 285 or 295/30’s.
Im already assuming rolled or shaved fenders in the rear and am pretty confident based off a friends old setup that those will fit just fine. It’s the fronts I’m more concerned with.
My buddy had 9 +37’s with 245’s and fit with ease. So am thinking I can split the difference of the extra half inch with the purpose of a more concave wheel with some slight camber perhaps...
PS, I hate poke. Wheel axis must stay within the outside of the fender.
Im already assuming rolled or shaved fenders in the rear and am pretty confident based off a friends old setup that those will fit just fine. It’s the fronts I’m more concerned with.
My buddy had 9 +37’s with 245’s and fit with ease. So am thinking I can split the difference of the extra half inch with the purpose of a more concave wheel with some slight camber perhaps...
PS, I hate poke. Wheel axis must stay within the outside of the fender.
#1020
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm looking to downsize to an 18" with a meaty tire this year. I daily drive, and regularly have back seat passengers so I don't want to deal with any tire rub. I'm on stock suspension, if I went to coilovers I'd stay stock height as well.
The wheels I'm currently looking at are the WedsSport RN-05M. Quite a few widths and offsets to choose from. What wheel width and offset, and what tire size would be the best for my situation?
http://www.evasivemotorsports.com/mm...ode=WEDS-RN05M
The wheels I'm currently looking at are the WedsSport RN-05M. Quite a few widths and offsets to choose from. What wheel width and offset, and what tire size would be the best for my situation?
http://www.evasivemotorsports.com/mm...ode=WEDS-RN05M