When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I upgraded my LED Fog Lights to Kensun Slim Ballast 6000k Fog Lights. I did quite a bit of research and found that Kensun had good reviews and a good warranty. I decided to install by dropping the bumper, as you can see. I wanted to make sure I was able to seat the bulbs correctly. I had to adapt the OEM fog light cap a little by drilling a hole large enough to allow the wire to pass through. I was then able to use the grommet which was supplied with the kit in order to waterproof the enclosure. Overall, I slightly difficult install but I'm happy with the results. As they are mu brighter than the LED and focus the beam of light, I have have better night vision which is important as I wanted to keep my headlights tinted which severally decreased the headlight brightness. Now with the HID Fog lights, brightness and distance has improved significantly.