When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Okay so brought the car in to have them push the mirror in but they say one of the small white rod sticking out (that goes into one of the small slot) is broke off So the mirror cannot be pushed back in. The entire mirror needs to be replace, which cost $668. Is this true? Seems outrageous for a small piece to effect the whole thing. I actually save the small white piece that fell off, but didn’t realize it would prevent the mirror from being pushed back in.
The piece is super tiny so superglue won’t work, tried it. So I take a closer look and figure out the problem. When I yanked the mirror out, the plastic piece came out. Only the mirror should pop out. So I pry the piece out from the mirror and now I can see it will be much easier to pop the mirror back in. However, the plastic piece won’t go back in since I kinda mangled it when I forced it back in. Probably need to secure the white piece somehow (or find a replacement if I could) and the mirror should pop right in. Live and learn. Thanks all.
I haven't looked at internals of the mirror but you may be able to get the internals from the used part market
Might even luck out with a cheap one that has a damaged casing but everything else intact inside
Yeah I’ll have to look for that part if it’s available. But I did manage to screw the piece back, though unable to adjust left and left due to the missing rods. It looks fine now for the time being, and applying the mirror is a snap now that I know how it works. Thank you all for your comments.
Every time I sit in my car with the ignition off and move my driver's seat back,I loose my side view mirrors settings.I have to readjust the mirrors all over again. Is there a way I can adjust my driver's seat without loosing the mirrors settings?
Unlike my Infiniti the mirrors don't follow me with additional adjustments of the seat.
Are you using memory setting #2 in vehicle? Perhaps you could utilize that setting for mirrors in the driver seat back mode. Seat, steering wheel and mirrors should all be set to a memory position.
If I am totally off on wrong tangent let me know and clarify for me.