When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I would like to know if any one have actual pics of the location of the oxygen sensors. I see a lot of people are asking for pics rather than explanations. I came across Bank 2 Sensor 2 and Bank 2 Sensor 1. Does anybody have pics of Bank 1 Sensor 1 and Bank 1 Sensor 2? I think this can benefit a lot of people as well as myself if we was to put this all in one thread. Thanks
Bank 1 (B1) refers to the bank that includes cylinder No. 1.
Bank 2 (B2) refers to the bank opposite bank 1.
Sensor 1 (S1) refers to the sensor that is located before the catalytic converters.
Sensor 2 (S2) refers to the sensor that is located after the catalytic converters.
Bank 1 (B1) refers to the bank that includes cylinder No. 1.
Bank 2 (B2) refers to the bank opposite bank 1.
Sensor 1 (S1) refers to the sensor that is located before the catalytic converters.
Sensor 2 (S2) refers to the sensor that is located after the catalytic converters.
OK i replaced Bank 1 Sensor 1. But damn Bank 2 Sensor 1 seem impossible to get to. I could hardly get the socket on the sensor to remove it. Any suggestions guys?
I cant remember how i replaced it but yeah it is difficult. Try using an open end combination wrench. You can only turn it maybe 1/16th at a time but it'll get the job done. Oh yeah...I cut the old wire since it was no good and used the box end of the wrench.
I know this is a old thread bump, can't remember if Debonair still posts or not, but if so thanks a million, these pics made it so much easier for me, had a bank 2 sensor 2 code a week or two ago and these pics turned it into a 15 minute fix..