Ne1tHeRe's 2015 Ultra White RC F
The following users liked this post:
GunnyFitz (07-02-20)
#2
The real question is: "What mods won't I do?"
MY END GOALS:
MY END GOALS:
- 500hp+
- Drop 200lbs+ and reduce unsprung mass
- Make exterior to my liking (tasteful yet bad@$$!)
- Enjoy the car!
- Xpel - Paint Protection Film (4/5 car covered)
- Opti-Coat - paint protection ceramic coating on full exterior (minus front windshield)
- Opti-Guard - full interior protection
- Yokohama - AVS F50 (GBC - F1 face) 20" x 9" +40 5x114.3 (F) wheels
- Yokohama - AVS F50 (GBC - F3 face) 20" x 11" +40 5x114.3 (R) wheels
- Michelin - Pilot Super Sport 255/30/20 (F) tires
- Michelin - Pilot Super Sport 305/25/20 (R) tires
- Denso - TPMS sensors
- ClearPlex - front windshield protective film
- Huper Optik - ceramic window tint
- Swift - Spec-R Springs F&R
- APEXi - dry intake filter
- LEMS - titanium intake pipe
- Amuse - full titanium resonated cat-back exhaust w/ oval burnt titanium tips
- Wind&Fire - "LEXUS" door LED projector lights
- Gloss black vinyl on corner edges of front lip
- Varis - carbon fiber long tail rear wing spoiler
- Varis - carbon fiber hood
- Duplicolor - gloss white spray vinyl DIY hood mod
- Artisan Spirits - CF roof spoiler
- Carbon Fiber steering wheel trim cover
- Red caliper paint kit w/ Brembo decals
- APEXi - Throttle Controller
- JDM RCF fender molding
- RRRacing CF intake shield
- RRRacing CF front “F” badge
- TRD gas cap
- Vinyl overlay on ????, ????, and ?????
- (Possible) Powder coating ????? & ?????
- catless headers w/ tune OR supercharger w/ tune (TBD)
- YOKOHAMA AVS F50 20 x 9 forged (F) wheel: 22lbs
- YOKOHAMA AVS F50 20 x 11 forged (R) wheel: 23.4lbs
- MICHELIN PILOT SUPER SPORT XL 255/30/20 (F) tire: 25.9lbs
- Pirelli P Zero Nero GT XL 305/25/20 (R) tire: 29lbs (old setup)
- MICHELIN PILOT SUPER SPORT XL 305/30/20 (R) tire: ??lbs
- Front wheel and tire: 47.9lbs (Stock 50.8lbs)
- (305) Rear wheel and tire: 52.4lbs (Stock 55.2lbs)
- Front Swift Spec-R Spring: 6.6lbs
- Rear Swift Spec-R Spring: 6.6lbs
- Front OEM Spring: ??lbs
- Rear OEM Spring: ??lbs
- Varis Long Tail Spoiler: ??lbs
- OEM tail spoiler: ??lbs
- Varis CF hood: ??lbs
- OEM hood: ??lbs
Last edited by Ne1tHeRe; 12-26-18 at 10:36 PM.
The following users liked this post:
GunnyFitz (05-02-18)
#3
Nice, I'm ordering a long tail spoiler for my customer! Can't wait to see how it looks!
-Josh
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#4
Knowing how I can be with modding cars in the past, I am going to try and pace myself...haha
The following users liked this post:
GunnyFitz (07-02-20)
#7
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
The following users liked this post:
GunnyFitz (07-02-20)
Trending Topics
#9
#10
You won't get any nice wheels for the RCF for cheap...just different levels of "not cheap" haha...I got a good deal on these but they were the last set.
I love the black insides with the polished face and lip. Also, love that they are lightweight forged but also they remove more material from the spokes (if you look closely) that reduce the weight even more. A nice lightweight 20" wheel that looks good and is strong
I love the black insides with the polished face and lip. Also, love that they are lightweight forged but also they remove more material from the spokes (if you look closely) that reduce the weight even more. A nice lightweight 20" wheel that looks good and is strong
Last edited by Ne1tHeRe; 03-23-16 at 08:13 AM.
The following users liked this post:
GunnyFitz (07-02-20)
The following users liked this post:
GunnyFitz (07-02-20)