When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking for the stock hangers with the rubber in good condition. I need both the left and right side. PM me your price picked up or shipped to 92683
I hadn't gone in quite awhile, and then there were two when I finally did. One was completely picked over and the other was a jackpot but half gone ... so I've been going much more regularly in case another desirable one shows up, so I don't miss out. None since, though. Yeah, lots of ES and GS models here, but very few LS or SC.
I found a set today. I don't think they're from a SC, but they were on an exhaust section laying in between cars in the Lexus/Toyota section and they look exactly like my rear hangers. Is this what you're looking for? If not, I'll hold onto them as spares.
Thanks, but that isn't what I'm looking for. The stock bushings have the metal bracket and rubber hanger integrated together.
On both of my cars, the metal brackets bolt onto the floor and the rubber hangers pop over their end nubs. There's nothing integrated that I'm aware of.
On both of my cars, the metal brackets bolt onto the floor and the rubber hangers pop over their end nubs. There's nothing integrated that I'm aware of.
The ones I'm looking for are the two on the bottom number 4 and 5.
That looks nothing like what's on my cars... Mine look like #2/3, but with the bigger metal base of #4/5.
I checked my old '94 Sewell schematic and it shows the same as what you posted. Does anyone have mounts like that?? I'd be inclined to say the schematics are wrong. Seems pretty unlikely that both of my cars would have had the originals replaced with the same thing.
That's interesting that yours are different. Maybe it is a SC300 vs SC400 difference? My car originally came with mounts like #4 and 5. I traded exhaust systems with a local SC owner and he had custom hangers made, so I had to give him my stock exhaust hangers along with my stock mufflers. Now that I want to switch exhaust, I can't use any bolt on mufflers until I locate the factory hangers.
SC3 vs SC4 was my first thought, too, but mine are both SC4 and so is the schematic.
One possibility is the originals were overly rust prone and didn't last long, and the factory replacement went to a different style. The ones I've got have more than their fair share of surface rust, so it's perhaps one of those items that Lexus never got the coating quite right. At any rate, you need the metal bracket in addition to the rubber hanger.
08-09-16, 07:06 PM
