GS - 4th Gen (2013-2020) Discussion about the 2013 and up GS models

Is there a change headlight DIY upgrade to 6k bulbs?

Thread Tools
 
Search this Thread
 
Old 10-14-16 | 08:33 AM
  #1  
Staggered3's Avatar
Staggered3
Thread Starter
Pole Position
 
Joined: Sep 2013
Posts: 315
Likes: 20
From: TX
Default Is there a change headlight DIY upgrade to 6k bulbs?

Searched around for a while, thought i had saw one but not listed in the FAQ's mod thread? I am finally putting my fogs in today and wanted to know if there is a specific way to change the headlights without removing the bumper and how to disassemble the headlight.
Old 10-14-16 | 08:36 AM
  #2  
Staggered3's Avatar
Staggered3
Thread Starter
Pole Position
 
Joined: Sep 2013
Posts: 315
Likes: 20
From: TX
Default

I think the 6k will provide a difference with the daytime running light, the all 4300k blends to bunch and doesnt show off the L as much at night..yea i know trivial but.. its the small things that make a difference to me
no fogs.. here is a pic i know you guys like pics..
Old 10-14-16 | 09:53 AM
  #3  
joedaddy1's Avatar
joedaddy1
Racer
iTrader: (1)
 
Joined: Dec 2005
Posts: 1,899
Likes: 198
From: Orange County
Default

fog lights? it's in the owner's manual.. no need to take bumper out..
Old 10-15-16 | 04:33 AM
  #4  
mrpink13's Avatar
mrpink13
Rookie
 
Joined: Jun 2016
Posts: 98
Likes: 0
From: ca
Default

Originally Posted by joedaddy1
fog lights? it's in the owner's manual.. no need to take bumper out..
go back to sleep.....
Old 10-15-16 | 10:50 AM
  #5  
mrpartsman's Avatar
mrpartsman
Lexus Test Driver
 
Joined: May 2012
Posts: 1,061
Likes: 21
From: ca
Default

The headlights on the left side u can take you wheel off or turn it all the way to the right and there is pocket there with a screw, so take the screw out and you will see the headlight ballast and u have to twist it and it pops right off, and make sure you put it the way you take it out, look at the notches on the bulb, only one way u can put it or else no way it will sit correctly.
The one on the right side is much easier to do , take the plastic cover off that covers the side all the way on top of the headlight and then take the cap of the headlight and its right there, that one is so much easier and more hand room to work with, same way make sure the u put in correctly or else it wont fit, good luck.
Old 10-17-16 | 06:22 AM
  #6  
Staggered3's Avatar
Staggered3
Thread Starter
Pole Position
 
Joined: Sep 2013
Posts: 315
Likes: 20
From: TX
Default

Originally Posted by mrpartsman
The headlights on the left side u can take you wheel off or turn it all the way to the right and there is pocket there with a screw, so take the screw out and you will see the headlight ballast and u have to twist it and it pops right off, and make sure you put it the way you take it out, look at the notches on the bulb, only one way u can put it or else no way it will sit correctly.
The one on the right side is much easier to do , take the plastic cover off that covers the side all the way on top of the headlight and then take the cap of the headlight and its right there, that one is so much easier and more hand room to work with, same way make sure the u put in correctly or else it wont fit, good luck.
thank you sir..as always...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Im1406
GX - 1st Gen (2003-2009)
6
09-16-19 07:27 PM
cupid0210
IS - 2nd Gen (2006-2013)
12
11-18-10 03:10 PM
3rdelement
IS - 1st Gen (2001-2005)
7
10-25-08 11:16 PM
xerxes717
IS - 2nd Gen (2006-2013)
8
05-19-08 01:24 PM
2slow
IS - 2nd Gen (2006-2013)
2
04-12-07 02:31 PM



Quick Reply: Is there a change headlight DIY upgrade to 6k bulbs?



All times are GMT -7. The time now is 06:25 AM.