When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry mrkwinning, I didn't meant to steal your thread, but seems like few people wants to see the rear.
Here is what mine looks like.
I did take out the rear caliper from the bracket. It's held on by two 12mm (I think) bolts. I slides out easily from the bracket and you can mask the brake pads and all other components.
As long as you don't disconnect the brake hose, you don't need to bleed the brake.
Did you have to release the hand brake when you took off rear calipers?
Back a while ago, I came upon this thread that had a good idea for dressing up the small back calipers using an Acura part. I think by adding this small plate, it made the rear calipers look slightly better and it allows you to stick a vinyl logo on it too. I think I will attempt it when I finally get around to painting the calipers. Just an idea...
Back a while ago, I came upon this thread that had a good idea for dressing up the small back calipers using an Acura part. I think by adding this small plate, it made the rear calipers look slightly better and it allows you to stick a vinyl logo on it too. I think I will attempt it when I finally get around to painting the calipers. Just an idea...
Got the covers yesterday but won't have time to look into the installation until next week. It might not be as easy as I initially had thought it would be.
Finally got around to installing the rear caliper covers. Had to sand off the ACURA letters, but that was quick & easy enough. Applied my Lexus lettering and a top coat of clear. Not too bad and it matches the front calipers very well.
Finally got around to installing the rear caliper covers. Had to sand off the ACURA letters, but that was quick & easy enough. Applied my Lexus lettering and a top coat of clear. Not too bad and it matches the front calipers very well.
Nice what Acura model is it for ? Available on eBay ? When are we holding the Caliper paint party lol. We should do a Dallas GS meetup there are soo many ppl from dallas area on the forum.
10-12-16, 08:17 PM
